Friday, March 11, 2011

Lancia Tetha 35HP, 1913

Lancia Tetha 35HP, 1913



Lancia Tetha 35HP, 1913

Lancia Beta, 1909

Lancia Beta, 1909



Lancia Beta, 1909

Lancia Gamma 20HP, 1910

Lancia Gamma 20HP, 1910


Lancia Gamma 20HP, 1910

Lancia Alpha 12HP, 1907

Lancia Alpha 12HP, 1907



Lancia Alpha 12HP, 1907

Dodge Challenger TA, 1970

Dodge Challenger TA, 1970



The first Challenger was the division's late entrant to the pony car market segment in the United States, launched for the 1970 model year.

It was strongly based on the similar Plymouth Barracuda's new E-body but with two inches (51 mm) of extra wheelbase and somewhat different outer sheetmetal. Exterior design was done by Carl "CAM'" Cameron, whom also did the exterior for the 1966 Dodge Charger. For the 1970 Challenger grille, CAM' based it off of an older sketch of his of a 1966 Charger prototype that was designed to have a turbine engine. The Charger never got the turbine, but the Challenger got that car's grille. Although the Challenger was well-received by the public (with 80,000 sales in 1970 alone), it was criticized by the press, and the pony car segment was already declining by the time the Challenger arrived. Challenger production ceased after the 1974 model year, only having lasted five years; performance dropped off dramatically after the 1971 models. About 165,500 Challengers were sold over this model's lifespan.

Challengers could either be hardtop coupes or convertibles (through 1971 only). The performance model was the R/T (Road/Track), available in both body styles; both standard and R/T hardtops could be ordered as the more luxurious SE specification, which included leather seats, a vinyl roof and a smaller 'formal' rear window. The convertible Challnger was only available as an R/T in 1970. In 1972, Dodge dropped the R/T badging and now called it the "Rallye". Other options, as well as engines and a manual transmission, included steeper rear axle ratios, a limited-slip differential, and a shaker hood scoop were gone for 1972.

A 1970-only model was the Dodge Challenger T/A (Trans Am) racing homologation car, which used a specially tuned Six-Pack version of the 340 in³ (5.6 L) engine, topped with a giant hood scoop on a fiberglass hood. 'Megaphone' exhaust outlets were fitted in front of the rear wheels. These cars came standard with front and rear sway bars to enhance handling. Unusually, different-sized wheels were fitted front and back, with very fat rubber on the rear. The T/A also came with a rear ducktail spoiler and front ground effect spoilers as standard equipment.

By 1972, all big-block engines were gone, maximum power was down to 240 hp, and production ceased in mid-1974.

Although the body style remained the same throughout the 5 year run, there were two notable changes to the front grille. 1971 models had a more stylized "split" grille, and the final manipulation coming in 1972, with the incorporation of the "sad-mouth" design. With this change to the front end, 1972 through 1974 models had little to no variation. The only way to properly distinguish said models is by the front and rear "bumperettes" which exponentially increased in size during each consecutive year. These changes were made to meet US regulations regarding crash test safety.

The 1970 taillights went all the way across the back of the car, with the backup light in the middle of the rear. In 1971, the backup lights were on the left and right instead of the middle. The taillight array also changed for 1972 onwards, with the Challenger now having four individual lamps similar to the mid-size Mercurys of the time.

Collector's value
As the Chrysler E-body line reaches legendary proportions, so too do the prices to buy them. 1970 and 1971 models tend to generate more attention from potential (and usually deep pocketed) buyers, as the performance and style options had not yet been toned down. However, with the popularity of these vehicles on the increase, coupled with the number of useable and restorable Challengers being on the decrease, many collectors have begun looking towards the later models to create their own customizable dream machines. Indeed, many "clones" of the more visceral 1970 and 1971 Challengers have been created by using 1972 through 1974 donors; The front and rear grilles/bumpers on these vehicles are easily interchangeable. However, the tail panel is not so easy to change, since the 1970 and 1971 tail panels are quite different from the 1972 to 1974 models.

Dodge Charger, 1969

Dodge Charger, 1969

There have been a number of vehicles bearing the Charger nameplate, but the name has generally denoted a performance model in the Dodge range. The 1966 to 1974 Chargers were the high performance B-body models. The 1975 to 1978 Chargers were based on the Chrysler Cordoba.

1969
In 1969 not much was changed for the popular Charger. Exterior changes included a new grille with a center divider and new longitudual taillights. A new trim line called the Special Edition (SE) was added. This could be available by itself or packaged with the R/T, thus making an R/T-SE. The SE added leather inserts to the front seats only, chrome rocker mouldings, a wood grain steering wheel and wood grain inserts on the instrument panel. A sunroof was added to the option list as well, and it would prove to be a very rare option. The bumble bee stripes returned as well, but were changed slightly. Instead of four stripes it now featured one huge stripe framed by two smaller stripes. In the middle of the stripe an R/T cutout was placed. If the stripe was deleted, then a metal R/T emblem was placed where the R/T cutout was. Total production dropped slightly to around 85,680 units. But in 1969 Dodge had its eye on NASCAR and in order to compete it would have to create two of the most rare and desirable of all Chargers: Charger 500, and the Charger Daytona.

The television series The Dukes of Hazzard (1979-1985) featured a 1969 Dodge Charger R/T that was named The General Lee, often quoted as the most recognizable car in the world. "The General" sported the Confederate flag painted on the roof and the words "GENERAL LEE" over each door. The windows were always open, as the doors were (allegedly) welded shut. The number "01" is painted on both doors. Also, when the horn button was pressed, it played the first 12 notes from the de facto Confederate States anthem "Dixie's Land". The muscle car performed spectacular jumps in almost every episode, and the show's popularity produced a surge of interest in the car. The show itself purchased hundreds of Chargers for stunts, as they generally destroyed at least one car per episode. (Real Chargers stopped being used for jumps at the end of the show's sixth season, and were grudgingly replaced with miniatures.)

Dodge Charger Daytona, 1969

Dodge Charger Daytona, 1969



NASCAR in 1969 stipulated that any car raced in their series had to be available for sale and must build a minimum of five hundred for the general public. Since the Charger 500 was not fast enough, Dodge went back into the wind tunnel and created one of the most outrageous and most sought after Chargers, the 1969 Dodge Charger Daytona.

The Daytona used a pointed nose piece that added 18 inches into the front of the car. This gave the car the downforce that the engineers were looking for, but the rear end still tended to lift at speed. To solve this, they mounted a large wing over the trunklid which would give the Charger Daytona and its sister car, the 1970 Plymouth Superbird, the nickname of "wing cars". The wing was 23 inches tall so that the trunk could be open without hitting the bottom of the wing. Slightly modified fenders and a hood from the upcoming 1970 Charger were used on the Daytona. Rear facing scoops were added to the front fenders, right above the tires, which mimicked their NASCAR brothers. But while they looked cool they didn't add any aerodynamic adavantage. They were only used to help with tire rub.

Only 503 Charger Daytonas were built with either 440 Magnum or 426 Hemi power. All Daytonas wore red, black, or white bumble stripes that bore the name "Daytona" in the middle of the stripe. The wings were painted the same color as the stripes. The "wing cars" would prove to be so fast and dominating that NASCAR effectively outlawed them for the 1971 season, as a new regulation was introduced that restricted all "aero" cars to a maximum engine displacement of 5.0 L (305 in³), down from the previous 7.0 L (429 in³).

Audi RSQ Concept, 2004

Audi RSQ Concept, 2004

The Audi RSQ is a mid-engined concept car developed for use as a product placement in the 2004 sci-fi movie I Robot. It is meant to depict a technologically advanced automobile from the year 2035.

This sports coupé is a visionary interpretation of Audi's typical automobile design. An important challenge presented to the designers was that despite its extreme character the car still had to be recognized by the audience as an Audi. To accommodate this demand, the engineers implemented a current Audi front-end design that includes a single-frame grille and the company's trademark overlapping rings.

The RSQ also includes special features suggested by movie director Alex Proyas. It utilizes spheres instead of wheels and its two butterfly doors are hinged to the C-posts of the body.

Although this kind of collaboration was a first for Audi, a similar project was developed by Lexus for use in the 2002 film Minority Report

ABT Audi TT-Limited Wide Body, 2002

ABT Audi TT-Limited Wide Body, 2002

Abt TT-limited wide body. From the race track to the road.

Two well-known Abt highlights played a role in the concept of the TT-limited wide-body: the TT-Sport and the TT-limited. In the past few month, both of them have attracted many customers and even more fans. With the limited wide body, the Abt team is now showing a spectacular synthesis of its two most extreme tuning versions of the TT. Thus, the successful company from Kempten demonstrates the state-of-the-art in TT-tuning.

This becomes also clear to the average layman, who might be led to believe that the TT-limited wide-body has got lost from the race track directly on the open road. Responsible for this is the spectacular bodywork kit. As a result of extensive wind tunnel tests, the specialists from Kempten have established an aerodynamic kit, which results into more downforce and therefore a better road-holding. No matter if on local roads or on the motorway. And, of course, on the race track. For instance at the Nurburgring, where Laurent Aiello has scored two brilliant victories for the Team Abt Sportsline with the Hasseroder-yellow Abt-Audi TT-R. The limited wide body not only shares the front spoilers and the extended fenders with the race car, but also the side skirts, a rear wing and a complicated diffuser, which gives downforce at the rear. The several carbonfibre parts also add to the racy feeling.

Aerodynamics, suspension and the impressive sport braking system - all of this serves for controlling the fireworks, that the Abt-technicians are lighting underneath the bonnet. 228 kW (310 hp) are the result of a power boost, that turns the standard 165 kW (225 hp) strong engine into a racing machine. An Abt turbocharger with intercooler and exhaust system allow the standard power plant to breathe freely. A top speed of approx. 254 kph and an acceleration from 0-100 kph in approx. 5.6 seconds speak for themselves.