Classic Automobiles, USA Classic Cars, Classic Cars Concept.

Ford Model A, 1930

2011-05-05T19:56:00.000-07:00

Ford Model A, 1930

Ford Model A Roadster, 1930

2011-05-05T19:55:00.001-07:00

Ford Model A Roadster, 1930

Total Engine Overhaul 100 miles. New Firestone tires (5), New Muffler and Tail Pipe, New Radiator , New Battery (Nov 2006). Rebuilt Distributor, Rebuilt Generator. New Water Pump, Brakes: (Drums, Linings, Linkages, Rods, Pins, etc, Shocks.

New LeBarron Bonney Front and Rumble Seat Upholstery and Convertible Top with matching Side Windows New Factory Color Paint. Head Lights Reflectors Re-Mirrored Finish. (Not Chrome Plated).

Cream Yellow with Black fenders, Chrome trim, Wind Wings, Rumble Seat, Ooga horn, Dual Cowl Lights, Wipers, Dual Tail Lights, Black LeBarron Bonney Convertible top with matching Window Curtains. The interior has new LeBarron Bonney Seats and Upholstery. Everything works on the car and it does not have any rust or dents. It has been kept garaged and runs great.

Year of Production: December 1930 (Overall Model A production period: 1928 - 1932) Overall Production: 1140710 units, all body types. Body Type: 2 seat roadster + rumble seat, 2155 pounds. Produced 122703 units, 435 US dollars.

Frame: 4x2 rear wheel drive front motor car.
Engine: 40hp/2200rpm, straight 4-cyl 4-stroke SV, 3285cc (200,5 cubic in.)
Bore/Stroke: 3,875/4,25 inches Compression ratio 4,5 : 1
Carburetor: Ford Gearbox: 3 speeds + 1 rear.
Brakes: All Mechanical
Weight: 2155 lbs Maximum speed: 70 mph
Tires: 5,50x19 inches
Fuel Tank Capacity: (10 gallons)

Ford Deluxe Model A, 1930

2011-05-05T19:55:00.000-07:00

Ford Deluxe Model A w/rumble seat, 1930

A sporty head-turner in great condition! Apple green w/brown trim and black fenders. Perky rumble seat. Etched-glass cozy-wings. Straw colored, powder-coated spoke wheels. 6 new tires. Grey mohair interior.

All guages, lights work. Brakes, steering,suspension and springs newly rebuilt. All wiring new. Every effort made to keep vehicle original. Photos available. Assembled at Long Beach Plant in 1930 and remained in California.

Ford A, 1930

2011-05-05T19:51:00.000-07:00

Ford A, 1930

Acura 3.2 TL, 2004

2011-05-05T19:50:00.000-07:00

Acura 3.2 TL, 2004

Highlights
The dramatically redesigned all-new 2004 TL features increased performance, even sportier handling and an assortment of class-leading technology. A new 3.2-liter engine delivers 270 horsepower and 238 lb-ft. of torque while lowering emissions and maintaining impressive fuel economy. The TL is now available with two transmissions, a 5-speed Sequential SportShift automatic and a new close-ratio 6-speed manual. Inside, an assortment of cutting edge electronics has been added to the TL's already impressive list of standard features. These include the first automotive application of DVD-Audio 5.1 surround sound as well as HandsFreeLink' wireless phone connectivity and XM" Satellite Radio, making the 2004 TL one of the most comprehensively equipped performance luxury sedans available. Highlights for the 2004 TL include:

Powertrain
+ Engine
- Horsepower increased from 225 to 270 horsepower
- Torque increased from 216 to 238 lbs- ft
- Dual-stage intake manifold
+ Available close-ratio 6-speed manual transmission
+ Limited slip differential (w/6-speed manual transmission)
+ Drive-by-wire throttle system
+ Maintenance Minder system
+ LEV-2 ULEV emissions
+ High flow exhaust system

Chassis
+ 4-wheel independent double wishbone suspension
+ 4-channel VSA (Vehicle Stability Assist)
+ 4-piston Brembo brakes (w/6-speed manual transmission)
+ 17-inch wheels and tires
+ Available 17-inch high performance tires (w/6-speed manual transmission)
+ Refined steering system for enhanced feel and reduced kickback
+ Electronic Brake Force Distribution (EBD)
+ Brake Assist System

Interior
+ Acura HandsFreeLink(TM) wireless phone connectivity
+ Acura/ELS(R) Premium 8-speaker Surround Sound System with DVD-Audio, DTS(TM) and CD 6-disc Changer, AM/FM Tuner and Dolby(R) Cassette
+ Multi-Info Display screen
+ Optional Acura Navigation System with Voice Recognition(TM) featuring 8-inch display Dual-zone, Dual-mode Automatic Climate Control
+ Steering-wheel mounted audio, cruise and voice recognition controls for HandsFreeLink and navigation system
+ Tilt and telescopic steering wheel
+ Enhanced keyless entry system with seven customizable memory functions
+ 10-way power adjustable driver's seat with power lumbar support
+ Power glass moonroof
+ Perforated leather seating and trim
+ Brushed aluminum accent trim

Body/Styling
+ Dramatic new styling
+ Wider, more aggressive stance
+ Enhanced torsional rigidity
+ Acoustic front windshield glass
+ High Intensity Discharge (HID) headlights

Safety
+ Front dual-stage, dual-threshold airbags
+ Driver's and front passenger's side airbag
+ Passenger's side airbag with occupant position sensor system
+ Standard side curtain airbags
+ Pedestrian Impact Protection
+ Enhanced seat belt warning system
+ Vehicle Stability Assist (VSA) with traction control

Lamborghini Islero, 1968

2011-04-07T06:17:00.000-07:00

Lamborghini Islero, 1968

Lamborghini Islero was produced by Lamborghini between 1968-1970 and featuring the Lamborghini V12 engine. It was the replacement for the 400GT. The car debuted at the 1968 Geneva Auto Show.

The Islero (pronounced "eez-LEHR-oh") was named after a bull that killed famed matador Manuel Rodriguez "Manolete" on August 28, 1947.

Since Carrozzeria Touring, the company that designed Lamborghini's chasis, was bankrupt, Carrozzeria Marazzi was the next logical choice as it was funded by Mario Marazzi, an old employee of Touring. The design was essentially a rebody of the 400GT, but the track was altered to allow for wider tires and while the Islero's body suffered from a lack of proper fit between the panels, its good outward visibility, roomier interior, and much improved soundproofing made it an improvement over previous models. It had a 325 hp, 4L V12 engine, 5 speed transmission, fully independent suspension, and disc brakes. Its top speed was rated at 155 mph. Only 125 Isleros were built.

An updated Islero, dubbed the Islero S was released in 1969. The engine in this model was tuned to 350 hp but the torque remained the same. There were quite a few styling changes including brightwork blind slots on the front fenders, an enlarged hood scoop (which supplied air to the interior of the car, not the engine), slightly flaired wheel arches, tinted windows, round side marker lights (instead of tear drops on the original), and a fixed section in the door windows. Various other changes included larger brake discs, revised rear suspension and revamped dashboard and interior. The top speed of the S improved to 161 mph or 260 km/h. Only 100 examples of the Islero S were built, bringing the production total of the Islero nameplate to 225 cars. Ferruccio Lamborghini himself had an Islero as his daily drive car during that era.

Lamborghini Espada, 1968

2011-04-07T06:16:00.000-07:00

Lamborghini Espada, 1968

The Lamborghini Espada is a grand tourer which was built by Italian car manufacturer Lamborghini between 1968 and 1978.
Based on the Marzal show car, displayed at the 1967 Geneva Auto Show, and the Bertone Pirana, a radically rebodied Jaguar E-type. It was to fill the spot of a true four seat car in Lamborghini's lineup, which already included the 400GT and Miura. 1217 cars were made, making it the most successful Lamborghini model at the time.

The car was designed by Giorgetto Giugiaro of Italdesign, shortly before he designed the Volkswagen Passat in 1971. Stylistically the Espada is the Passat's immediate predecessor, and the Passat can be seen as a family saloon and fastback version of the Espada from a design viewpoint.

The Espada was originally fitted with a 4L 325bhp V12 engine, fully independent suspension and four wheel disc brakes. Most transmissions were manual, and the Espada also introduced one of the first automatic transmissions able to absorb the torque of a large sporting V-12. It had unusual gearing, with 3 ratios: drive, 1 and reverse.

During its 10 year production the car underwent some changes, and three different models were produced. These were the S1 (1968-1970), the S2 (1970-1972) and the S3 (1972-1978). Each model featured engine power improvements, but only minor details were changed with the exterior design. The interior was altered dramatically between each model. An all new dashboard and steering wheel was installed for the S2, and the interior was again revamped for the S3. In 1970, power assisted steering was offered as an option, and in 1974 an automatic transmission was also offered. In 1976 impact bumpers had to be installed to meet United States safety requirements, and some people consider cars produced with them to be the S4, but Lamborghini did not officially change the designation. Near the end of the Espada's life, Bertone designed a four door prototype, which was never put into production.

In 1999, a new version of the Espada was rumored to be in the works, but it was right at the time Lamborghini wanted to concentrate on a Diablo successor, so little became of the idea aside from a few drawings

Porsche 930 Turbo, 1980

2011-04-03T06:59:00.000-07:00

Porsche 930 Turbo, 1980

The Porsche 930 (usually pronounced nine-thirty) was a sports car built by Porsche, 930 actually being the "type number" for the pre-964 generation Porsche 911 Turbo produced between 1975 and 1989. It was Porsche's top-of-the-range model for its entire production duration and at the time of its introduction the fastest production car available in Germany.

Model history
Porsche began experimenting with turbocharging technology on their race cars during the late 1950s, and in 1972 began development on a turbocharged version of the 911. Porsche originally needed to produce the car in order to comply with homologation regulations and had intended on marketing it as a street legal race vehicle like the 1973 Carrera 2.7 RS. When the homologation rules changed, Porsche continued to develop the car anyway, deciding to make it a fully-equipped variant of the 911 that would top the model range and give Porsche a more direct competitor to vehicles from Ferrari and Lamborghini, which were more expensive and more exclusive than the standard 911. Although Porsche no longer needed the car to meet homologation requirements, it proved a viable platform for racing vehicles, and became the basis for the 934 and 935 race cars. Ferdinand "Ferry" Porsche, who was running the company at the time, handed development of the vehicle over to Ernst Fuhrmann, who adapted the turbo-technology originally developed for the 917/30 CAN-AM car to the 3.0 litre flat-six from the Carrera RS 3.0, creating what Porsche internally dubbed as 930. Total output from the engine was 260 PS (191 kW; 256 hp), much more than the standard Carrera. In order to ensure that the platform could make the most of the higher power output, a revised suspension, larger brakes and stronger gearbox became part of the package, although some consumers were unhappy with Porsche's use of a 4-speed whilst a 5-speed manual was available in the "lesser" Carrera. A "Whale-Tail" rear spoiler was installed to help vent more air to the engine and help create more downforce at the rear of the vehicle, and wider rear wheels with upgraded tires combined with flared wheelarches were added to increase the 911's width and grip, making it more stable.

Porsche badged the vehicle simply as "Turbo" (although early U.S. units were badged as "Turbo Carrera") and debuted it at the Paris Auto Show in October 1974 before putting it on sale in the spring of 1975; export to the United States began in 1976.

The Porsche 930 proved very fast but also very demanding. The 911 was prone to oversteer because of its rear engine layout and short wheelbase; combining those traits with the power of the turbocharged motor, which exhibited significant turbo-lag, meant driving the car required more skill to drive at the edge of its (higher) level of performance. Even though the rear engine layout provided superior traction, sudden bursts of power to the rear wheels in mid-corner could break the tires loose, causing the car to literally spin out of control. This effect was amplified if an unexperienced driver would instinctively lift the throttle in reaction. The vehicle needed to be kept at high revs during spirited driving to minimise the turbo lag. Skilled drivers quickly learned how to drive the Porsche 930 properly, and with that knowledge came the ability to drive the car above and beyond the levels of most other sports cars. Nevertheless, some fatal accidents resulted in product liability law suits brought against Porsche in the US, where Ralph Nader had made his name criticizing the rear engine-rear wheel drive layout of the Chevrolet Corvair.

Porsche made its first and most significant upgrades to the Porsche 930 for 1978, enlarging the engine to 3.3 litres and adding an air-to-air intercooler. By cooling the pressurized air charge, the intercooler helped increase power output to 300 hp (DIN); the rear 'whale tail' spoiler was re-profiled and raised slightly to make room for the intercooler. Porsche also upgraded the brakes to units similar to those used on the 917 racecar.

Changing emissions regulations in Japan and the U.S. forced Porsche to withdraw the 930 from those markets in 1980. Believing the 928 would eventually replace the 911, Fuhrmann cut-back spending on the model, and it was not until Fuhrmann's resignation the company finally committed the financing to re-regulate the car.

The Porsche 930 remained available in Europe, and for 1983 a 330 PS (243 kW; 325 hp) performance option became available on a build-to-order basis from Porsche. With the add-on came a 4-pipe exhaust system and an additional oil-cooler requiring a remodelled front spoiler and units bearing the add-on often featured additional ventilation holes in the rear fenders and modified rockers.

Porsche offered a "Flachbau" ("slantnose") Porsche 930 under the "Sonderwunschprogramm" (special order) program beginning in 1981, an otherwise normal 930 with a 935-style slantnose instead of the normal 911 front end. Each Flachbau unit was handcrafted by remodeling the front fenders. So few were built that the slantnose units often commanded a high premium over sticker, adding to the fact that they required a premium of up to 60 per cent (highly indivdualized cars even more) over the standard price. Several sources claim the factory built 948 units. The Flachbau units delivered in Europe usually featured the 330 hp (246 kW) performance kit.

928 sales had risen slightly by the 1985 model year, but there was still some question as to if it were truly capable of superseding the 911 as the company's premier model, and for 1986 Porsche re-introduced the Porsche 930 to the Japanese and U.S. markets, now featuring an emission-controlled engine producing 282 PS (207 kW; 278 hp). At the same time Porsche introduced the Targa and Cabriolet variants, both of which proved popular.

Porsche discontinued the 930 after model year 1989 when its underlying "G-Series" platform was being replaced by the 964. '89 models were the only versions of the Porsche 930 to feature a 5-speed transmission. A turbo version of the 964 officially succeeded the Porsche 930 in 1991 with a modified version of the same 3.3 litre flat-6 engine and a 5-speed transmission.

Mercury Marauder Convertible Concept, 2002

2011-04-03T06:58:00.000-07:00

Mercury Marauder Convertible Concept, 2002

From 2003 to 2004, Ford produced the Marauder as a "high-performance" version of the Mercury Grand Marquis sedan.

The 2003 Mercury Marauder was based on the Ford Panther platform which utilizes a hydroformed steel frame, front rack and pinion steering, in addition to totally revised front and rear suspension with monotube shock absorbers, the Marauder also had a naturally aspirated 4.6 L DOHC V8 with 302 hp and 318 ft·lbf torque. 2004 was the last year for this Marauder mostly due to lackluster sales, blamed by some on bland styling and an incorrect target audience. Originally, they were produced in "any color the customer desired, so long as it was black." Eventually, the Marauder was offered in silver, blue, and red but in limited quantities.

After the Marauder was discontinued, the Ford Crown Victoria LX Sport remains and bears a similar appearance to the Marauder but is powered by the lesser 4.6 L 2-valve SOHC V8 engine rated at 239 hp. The LX Sport still offers the same exterior and interior colors of the Marauder, however it uses wood grain trim on the dashboard and doors, unlike the Marauder, which used aluminum.

Total production for the 2003 - 2004 Mercury Marauder was 11,052:

* 2003 - Total: 7839 (328 Blue, 417 Silver, 7094 Black)
* 2004 - Total: 3213 (980 Dark Toreador Red, 997 Silver, 1236 Black)

Lancia Tetha 35HP, 1913

2011-03-11T04:56:00.000-08:00

Lancia Tetha 35HP, 1913

Lancia Beta, 1909

2011-03-11T04:55:00.001-08:00

Lancia Beta, 1909

Lancia Gamma 20HP, 1910

2011-03-11T04:55:00.000-08:00

Lancia Gamma 20HP, 1910

Lancia Alpha 12HP, 1907

2011-03-11T04:54:00.000-08:00

Lancia Alpha 12HP, 1907

Dodge Challenger TA, 1970

2011-03-11T04:48:00.000-08:00

Dodge Challenger TA, 1970

The first Challenger was the division's late entrant to the pony car market segment in the United States, launched for the 1970 model year.

It was strongly based on the similar Plymouth Barracuda's new E-body but with two inches (51 mm) of extra wheelbase and somewhat different outer sheetmetal. Exterior design was done by Carl "CAM'" Cameron, whom also did the exterior for the 1966 Dodge Charger. For the 1970 Challenger grille, CAM' based it off of an older sketch of his of a 1966 Charger prototype that was designed to have a turbine engine. The Charger never got the turbine, but the Challenger got that car's grille. Although the Challenger was well-received by the public (with 80,000 sales in 1970 alone), it was criticized by the press, and the pony car segment was already declining by the time the Challenger arrived. Challenger production ceased after the 1974 model year, only having lasted five years; performance dropped off dramatically after the 1971 models. About 165,500 Challengers were sold over this model's lifespan.

Challengers could either be hardtop coupes or convertibles (through 1971 only). The performance model was the R/T (Road/Track), available in both body styles; both standard and R/T hardtops could be ordered as the more luxurious SE specification, which included leather seats, a vinyl roof and a smaller 'formal' rear window. The convertible Challnger was only available as an R/T in 1970. In 1972, Dodge dropped the R/T badging and now called it the "Rallye". Other options, as well as engines and a manual transmission, included steeper rear axle ratios, a limited-slip differential, and a shaker hood scoop were gone for 1972.

A 1970-only model was the Dodge Challenger T/A (Trans Am) racing homologation car, which used a specially tuned Six-Pack version of the 340 in³ (5.6 L) engine, topped with a giant hood scoop on a fiberglass hood. 'Megaphone' exhaust outlets were fitted in front of the rear wheels. These cars came standard with front and rear sway bars to enhance handling. Unusually, different-sized wheels were fitted front and back, with very fat rubber on the rear. The T/A also came with a rear ducktail spoiler and front ground effect spoilers as standard equipment.

By 1972, all big-block engines were gone, maximum power was down to 240 hp, and production ceased in mid-1974.

Although the body style remained the same throughout the 5 year run, there were two notable changes to the front grille. 1971 models had a more stylized "split" grille, and the final manipulation coming in 1972, with the incorporation of the "sad-mouth" design. With this change to the front end, 1972 through 1974 models had little to no variation. The only way to properly distinguish said models is by the front and rear "bumperettes" which exponentially increased in size during each consecutive year. These changes were made to meet US regulations regarding crash test safety.

The 1970 taillights went all the way across the back of the car, with the backup light in the middle of the rear. In 1971, the backup lights were on the left and right instead of the middle. The taillight array also changed for 1972 onwards, with the Challenger now having four individual lamps similar to the mid-size Mercurys of the time.

Collector's value
As the Chrysler E-body line reaches legendary proportions, so too do the prices to buy them. 1970 and 1971 models tend to generate more attention from potential (and usually deep pocketed) buyers, as the performance and style options had not yet been toned down. However, with the popularity of these vehicles on the increase, coupled with the number of useable and restorable Challengers being on the decrease, many collectors have begun looking towards the later models to create their own customizable dream machines. Indeed, many "clones" of the more visceral 1970 and 1971 Challengers have been created by using 1972 through 1974 donors; The front and rear grilles/bumpers on these vehicles are easily interchangeable. However, the tail panel is not so easy to change, since the 1970 and 1971 tail panels are quite different from the 1972 to 1974 models.

Dodge Charger, 1969

2011-03-11T04:47:00.000-08:00

Dodge Charger, 1969

There have been a number of vehicles bearing the Charger nameplate, but the name has generally denoted a performance model in the Dodge range. The 1966 to 1974 Chargers were the high performance B-body models. The 1975 to 1978 Chargers were based on the Chrysler Cordoba.

1969
In 1969 not much was changed for the popular Charger. Exterior changes included a new grille with a center divider and new longitudual taillights. A new trim line called the Special Edition (SE) was added. This could be available by itself or packaged with the R/T, thus making an R/T-SE. The SE added leather inserts to the front seats only, chrome rocker mouldings, a wood grain steering wheel and wood grain inserts on the instrument panel. A sunroof was added to the option list as well, and it would prove to be a very rare option. The bumble bee stripes returned as well, but were changed slightly. Instead of four stripes it now featured one huge stripe framed by two smaller stripes. In the middle of the stripe an R/T cutout was placed. If the stripe was deleted, then a metal R/T emblem was placed where the R/T cutout was. Total production dropped slightly to around 85,680 units. But in 1969 Dodge had its eye on NASCAR and in order to compete it would have to create two of the most rare and desirable of all Chargers: Charger 500, and the Charger Daytona.

The television series The Dukes of Hazzard (1979-1985) featured a 1969 Dodge Charger R/T that was named The General Lee, often quoted as the most recognizable car in the world. "The General" sported the Confederate flag painted on the roof and the words "GENERAL LEE" over each door. The windows were always open, as the doors were (allegedly) welded shut. The number "01" is painted on both doors. Also, when the horn button was pressed, it played the first 12 notes from the de facto Confederate States anthem "Dixie's Land". The muscle car performed spectacular jumps in almost every episode, and the show's popularity produced a surge of interest in the car. The show itself purchased hundreds of Chargers for stunts, as they generally destroyed at least one car per episode. (Real Chargers stopped being used for jumps at the end of the show's sixth season, and were grudgingly replaced with miniatures.)

Dodge Charger Daytona, 1969

2011-03-11T04:44:00.000-08:00

Dodge Charger Daytona, 1969

NASCAR in 1969 stipulated that any car raced in their series had to be available for sale and must build a minimum of five hundred for the general public. Since the Charger 500 was not fast enough, Dodge went back into the wind tunnel and created one of the most outrageous and most sought after Chargers, the 1969 Dodge Charger Daytona.

The Daytona used a pointed nose piece that added 18 inches into the front of the car. This gave the car the downforce that the engineers were looking for, but the rear end still tended to lift at speed. To solve this, they mounted a large wing over the trunklid which would give the Charger Daytona and its sister car, the 1970 Plymouth Superbird, the nickname of "wing cars". The wing was 23 inches tall so that the trunk could be open without hitting the bottom of the wing. Slightly modified fenders and a hood from the upcoming 1970 Charger were used on the Daytona. Rear facing scoops were added to the front fenders, right above the tires, which mimicked their NASCAR brothers. But while they looked cool they didn't add any aerodynamic adavantage. They were only used to help with tire rub.

Only 503 Charger Daytonas were built with either 440 Magnum or 426 Hemi power. All Daytonas wore red, black, or white bumble stripes that bore the name "Daytona" in the middle of the stripe. The wings were painted the same color as the stripes. The "wing cars" would prove to be so fast and dominating that NASCAR effectively outlawed them for the 1971 season, as a new regulation was introduced that restricted all "aero" cars to a maximum engine displacement of 5.0 L (305 in³), down from the previous 7.0 L (429 in³).

Audi RSQ Concept, 2004

2011-03-11T04:43:00.000-08:00

Audi RSQ Concept, 2004

The Audi RSQ is a mid-engined concept car developed for use as a product placement in the 2004 sci-fi movie I Robot. It is meant to depict a technologically advanced automobile from the year 2035.

This sports coupé is a visionary interpretation of Audi's typical automobile design. An important challenge presented to the designers was that despite its extreme character the car still had to be recognized by the audience as an Audi. To accommodate this demand, the engineers implemented a current Audi front-end design that includes a single-frame grille and the company's trademark overlapping rings.

The RSQ also includes special features suggested by movie director Alex Proyas. It utilizes spheres instead of wheels and its two butterfly doors are hinged to the C-posts of the body.

Although this kind of collaboration was a first for Audi, a similar project was developed by Lexus for use in the 2002 film Minority Report

ABT Audi TT-Limited Wide Body, 2002

2011-03-11T04:41:00.000-08:00

ABT Audi TT-Limited Wide Body, 2002

Abt TT-limited wide body. From the race track to the road.

Two well-known Abt highlights played a role in the concept of the TT-limited wide-body: the TT-Sport and the TT-limited. In the past few month, both of them have attracted many customers and even more fans. With the limited wide body, the Abt team is now showing a spectacular synthesis of its two most extreme tuning versions of the TT. Thus, the successful company from Kempten demonstrates the state-of-the-art in TT-tuning.

This becomes also clear to the average layman, who might be led to believe that the TT-limited wide-body has got lost from the race track directly on the open road. Responsible for this is the spectacular bodywork kit. As a result of extensive wind tunnel tests, the specialists from Kempten have established an aerodynamic kit, which results into more downforce and therefore a better road-holding. No matter if on local roads or on the motorway. And, of course, on the race track. For instance at the Nurburgring, where Laurent Aiello has scored two brilliant victories for the Team Abt Sportsline with the Hasseroder-yellow Abt-Audi TT-R. The limited wide body not only shares the front spoilers and the extended fenders with the race car, but also the side skirts, a rear wing and a complicated diffuser, which gives downforce at the rear. The several carbonfibre parts also add to the racy feeling.

Aerodynamics, suspension and the impressive sport braking system - all of this serves for controlling the fireworks, that the Abt-technicians are lighting underneath the bonnet. 228 kW (310 hp) are the result of a power boost, that turns the standard 165 kW (225 hp) strong engine into a racing machine. An Abt turbocharger with intercooler and exhaust system allow the standard power plant to breathe freely. A top speed of approx. 254 kph and an acceleration from 0-100 kph in approx. 5.6 seconds speak for themselves.

Lamborghini 400 GT, 1966

2011-02-17T05:37:00.000-08:00

Lamborghini 400 GT, 1966

The Lamborghini 400GT 2+2 was a 2+2-seated sports car from the Italian manufacturer Lamborghini, successor to the 350GT. First presented at the 1966 Geneva Auto Show.

Compared to its predecessor the engine was enlarged to 3,929 ccm (240 c.i.), increasing the power to 320 bhp. The 400GT 2+2 was actually a different body from the 350GT, with a longer wheelbase, different roofline, and some sheetmetal changes throughout the car. The larger body shape enabled the +2 seating to be installed in the rear, where the 350GT only had room for luggage or +1 seating. The bodywork was designed by Carrozzeria Touring. The 400GT 2+2 also had a Lamborghini designed gearbox, with Porsche style synchromesh on all gears including, which greatly improved the drivetrain.

There was a variant of the 350GT with the 4L V12 fitted to it, which was called the 400GT. Only 23 of these smaller coupes were built, three of which had desirable aluminium bodywork.
A total of 247 units were built from 1966 to 1968, when it was replaced with the Islero.

Lamborghini 350 GTS Spider, 1966

2011-02-17T05:34:00.000-08:00

Lamborghini 350 GTS Spider, 1966

The Lamborghini 350GT was the first production car by Lamborghini, first shown at the Turin Motor Show in 1963.

The car featured a 3.5 litre quad-cam V-12 engine (hence its designation), independent rear suspension (while Ferrari still used live rear axles) and a controversial 2+1 semi-fastback body by Carrozzeria Touring of Milan.

The 350GT generally drew high praises at the time for its flexible and high-revving engine, its stable cornering, even on rough surfaces, and its high level of finish. 120 copies were built from 1963 to 1966.

Lamborghini 350 GT, 1964

2011-02-17T05:31:00.000-08:00

Lamborghini 350 GT, 1964

The Lamborghini 350GT was the first production car by Lamborghini, first shown at the Turin Motor Show in 1963.

The car featured a 3.5 litre quad-cam V-12 engine (hence its designation), independent rear suspension (while Ferrari still used live rear axles) and a controversial 2+1 semi-fastback body by Carrozzeria Touring of Milan.
The 350GT generally drew high praises at the time for its flexible and high-revving engine, its stable cornering, even on rough surfaces, and its high level of finish. 120 copies were built from 1963 to 1966.

Lamborghini 350 GTV, 1963

2011-02-17T05:27:00.000-08:00

Lamborghini 350 GTV, 1963

The Lamborghini 350 GTV was the prototype and forerunner of the later 350 GT (Lamborghini´s first production model).

It featured a controversial semi-fastback body design by Franco Scaglione, which was modified for series production by Carrozzeria Touring, and Lamborghini's own 3.5 liter V-12 engine. The car was presented to the public on the 1963 Turin Auto Show.

Hummer H2 SUT Dirt Sport Concept, 2003

2011-02-09T04:39:00.000-08:00

Hummer H2 SUT Dirt Sport Concept, 2003

The H2 is the second vehicle sold under the Hummer marque of General Motors. It is a large SUV (though smaller than the Hummer H1) with room for five passengers and substantial off-road ability. The rearmost part of the H2 SUV was modified to a pickup truck bed for the 2004 H2 SUT ("Sport Utility Truck").

Overview
The H2 is built under contract by AM General at a specially constructed plant in Mishawaka, Indiana, USA. Although it shares GM's GMT820 truck platform with the Chevrolet Tahoe and GMC Yukon, those vehicles differ in many ways and are constructed in three other GM plants. The H2's final frame assembly is made up of 3 sections: The front uses a modified GM 2500-Series utility frame, the mid-section is all new and is completely boxed, and the rear section uses a modifed GM 1500-Series frame which is upgraded for the 8000 pound (3629 kg) gross vehicle weight.

H2 sales were initially strong, but fell to 28,898 for 2004 and 23,213 for 2005.
The H2 was nominated for the North American Truck of the Year award for 2003.

Engine
2003–2005 6000 6.0 L (366 in³) V8

Capabilities
With its high ground clearance, large tires, protective underbody plates, and low gearing, the H2 is capable of climbing over a 20-inch-high (0.4 m) step-up wall. A massive truck frame and wide track offer stability against overturning compared to some of the more common light truck SUVs, although objective tests have not been performed by the government or other outside parties due to its specialised vehicle class.

Fuel economy
For typical travel on improved roads, users report fuel economy of between 10 and 14 miles per gallon, which converts to between 14 and 17 L/100 km. Worst case urban driving is said to be in the range of 8 to 14 U.S. mpg (21 to 25 L/100 km). Although General Motors does not provide official H2 fuel economy ratings, most reviews have observed high single to low double-digit mileage, similar to the numbers above.

It should be noted that other large vehicles also have poor fuel economy especially with optional larger engines including the Dodge Ram 1500 series pickup trucks equipped with either the 8.3L V10 (MSRP US$48,500) or the 4.7L V8 Flexible Fuel engine running E85 fuel (MSRP US$31,300). Both of these engines are rated at 9 U.S. mpg city and 11 U.S. mpg highway by the E.P.A. as one example.

Tax benefits
Under the United States income tax code, the cost of vehicles over 6,000 pounds (2722 kg) can be deducted from income. This deduction was enacted decades ago to assist self-employed people in purchasing a vehicle for business use. The weight minimum was intended to limit the deduction to commercial-type trucks. For many years, the deduction remained below the average cost of a new vehicle, since large trucks were relatively inexpensive. Since it is a reduction in taxable income, the actual value of this deduction averages 30% of the price of the vehicle in question.

The increasing popularity of these vehicles in the last decade, however, pushed their average price to nearly double the average passenger car cost. In response, the 2002 Tax Act increased this "Section 179 depreciation deduction" to US$75,000, and it rose again to US$102,000 for the 2004 tax year. This is more than three times the current average cost of a passenger car in the United States and covers a large number of luxury models, including the Hummer H2. In late 2004, the deduction was again reduced to US$25,000.

Criticism
The Hummer H2 is one of the most severely criticized civilian vehicles on the market today. Critics have expressed concern at the fuel economy which they cite as being among the most inefficient of vehicles. The Environmental Protection Agency does not test them for fuel economy because of their weight, they are thus categorised as light trucks and thus are not bound to fuel economy standards.

The Hummer H2 is criticised for contributing towards petroleum comsumption in the United States. In addition, they are criticized for obstructing the views of drivers behind them with their large vehicles. Criticism is also leveled at the H2 by safety advocates who have expressed concern that their size and height make them far deadlier to smaller vehicles as well as bicyclists, and pedestrians since the front of the Hummer H2 will likely strike the head and/or chest where injuries are far more life-threatening instead of the knees where regular cars are most likely to impact a pedestrian.

Hummer H, 2003

2011-02-09T04:38:00.000-08:00

Hummer H, 2003

The Hummer H1 is a civilian vehicle based on the High Mobility Multipurpose Wheeled Vehicle (HMMWV), popularly known as the Humvee, which was created by AM General.

History
Originally released in the civilian market in 1992, the Hummer H1 owes its birth to the popularity of photos from Operation Desert Storm and the enthusiastic campaign from actor Arnold Schwarzenegger, who personally owns several variants of Hummer vehicles. GM announced that 2006 would be the last model year for the Hummer H1 with production winding down in June 2006, due to a new emission laws for Diesel engine vehicles which take effect in 2007. No version of the Hummer H1 ever produced would meet these new standards. AM General currently has orders for an excess of 50,000 new HMMWVs to be produced between 2006-2009 for the United States Military. AM General also will continue to produce the H1, just not the Alpha. These vehicles will be sold through Fleet sales. The next H1 will most-likely bear a refined version of the prior 6.5L Turbo Diesel engine, but that has not been confirmed. Selling the H1's through fleet sales will allow the AM General to not be subjected to the new emission rules and regulations. AM General has sufficient fleet orders to produce 600-800 units per year right now.

Specifications
The Hummer H1 has three common variants: a convertible-like soft top, a four-door hard top pickup truck and a Wagon body version. Other less known variants include a two-door pickup truck and a four-door slantback. At this time, the convertible/soft top and the station wagon versions are the only ones available in the mass market. The two door and four door pickup versions are only available in fleet livery.

Five engine types and three automatic transmission types can be found in Hummer H1s. The common engine/transmission combinations are:
    * 6.2 L Detroit Diesel V8/GM TH400/3L80 3-speed
    * 6.5 L Detroit Diesel V8/GM 4L80-E 4-speed
    * 5.7 L Vortec 5700 gasoline V8 TBI/GM 4L80-E 4-speed
    * 6.5 L turbo Detroit Diesel V8/GM 4L80-E 4-speed
    * 6.6 L Duramax LLY turbo Diesel/Allison 1000 5-speed (model year 2006)

The Hummer H1 shares some common driveline parts with its HMMWV brethren. Items like brakes, differentials, frame and major body panels (hood, tailgate and quarter panels) are identical between the HMMWV and the Hummer H1. All Hummer H1s and HMMWVs come off the same first stage assembly line, and then are separated midway to either become a military HMMWV or a civilian H1.

Hummer H1s are unique in the way they handle off road. They are inherently very stable, thanks to their wide stance. They also can ford 30 inches (76 cm) of water, climb a 22-inch (56 cm) step, have a stock ground clearance of 16 inches (41 cm) (thanks to its design of tucking driveline components inside a channel, which subsequently intrudes into the cabin space of the vehicle), have approach/departure angles of 72/37.5 degrees and most H1s are equipped with Central Tire Inflation System (CTIS), which enables the driver to increase or decrease the tire air pressure at will.

Hummer H1s have many unusual features. They use inboard brakes. They have geared hubs, allowing the drivetrain's half shafts to be up high for greater clearance. The radiator is up high, sloping back over the engine. Rather than using simple runflat tires, aluminum or rubber inserts are an optional feature for runflat ability. A central tire inflation system is available as an option. Chemical warfare resistant paint is available only on the military version.

Hummer Bike, 2003

2011-02-09T04:36:00.000-08:00

Hummer Bike, 2003

Hummer H1 10th Anniversary Edition, 2002

2011-02-09T04:31:00.000-08:00

Hummer H1 10th Anniversary Edition, 2002

The Hummer H1 is a civilian vehicle based on the High Mobility Multipurpose Wheeled Vehicle (HMMWV), popularly known as the Humvee, which was created by AM General.

Specifications
The Hummer H1 has three common variants: a convertible-like soft top, a four-door hard top pickup truck and a Wagon body version. Other less known variants include a two-door pickup truck and a four-door slantback. At this time, the convertible/soft top and the station wagon versions are the only ones available in the mass market. The two door and four door pickup versions are only available in fleet livery.

Five engine types and three automatic transmission types can be found in Hummer H1s. The common engine/transmission combinations are:
    * 6.2 L Detroit Diesel V8/GM TH400/3L80 3-speed
    * 6.5 L Detroit Diesel V8/GM 4L80-E 4-speed
    * 5.7 L Vortec 5700 gasoline V8 TBI/GM 4L80-E 4-speed
    * 6.5 L turbo Detroit Diesel V8/GM 4L80-E 4-speed
    * 6.6 L Duramax LLY turbo Diesel/Allison 1000 5-speed (model year 2006)

The Hummer H1 shares some common driveline parts with its HMMWV brethren. Items like brakes, differentials, frame and major body panels (hood, tailgate and quarter panels) are identical between the HMMWV and the Hummer H1. All Hummer H1s and HMMWVs come off the same first stage assembly line, and then are separated midway to either become a military HMMWV or a civilian H1.

Hummer H1s are unique in the way they handle off road. They are inherently very stable, thanks to their wide stance. They also can ford 30 inches (76 cm) of water, climb a 22-inch (56 cm) step, have a stock ground clearance of 16 inches (41 cm) (thanks to its design of tucking driveline components inside a channel, which subsequently intrudes into the cabin space of the vehicle), have approach/departure angles of 72/37.5 degrees and most H1s are equipped with Central Tire Inflation System (CTIS), which enables the driver to increase or decrease the tire air pressure at will.

Hummer H1s have many unusual features. They use inboard brakes. They have geared hubs, allowing the drivetrain's half shafts to be up high for greater clearance. The radiator is up high, sloping back over the engine. Rather than using simple runflat tires, aluminum or rubber inserts are an optional feature for runflat ability. A central tire inflation system is available as an option. Chemical warfare resistant paint is available only on the military version.

Hummer H2 SUV Concept, 2002

2011-02-09T04:28:00.000-08:00

Hummer H2 SUV Concept, 2002

Hummer H, 2002

2011-02-09T04:25:00.000-08:00

Hummer H, 2002

The Hummer H1 is a civilian vehicle based on the High Mobility Multipurpose Wheeled Vehicle (HMMWV), popularly known as the Humvee, which was created by AM General.

Specifications
The Hummer H1 has three common variants: a convertible-like soft top, a four-door hard top pickup truck and a Wagon body version. Other less known variants include a two-door pickup truck and a four-door slantback. At this time, the convertible/soft top and the station wagon versions are the only ones available in the mass market. The two door and four door pickup versions are only available in fleet livery.
Hummer H1

Five engine types and three automatic transmission types can be found in Hummer H1s. The common engine/transmission combinations are:
    * 6.2 L Detroit Diesel V8/GM TH400/3L80 3-speed
    * 6.5 L Detroit Diesel V8/GM 4L80-E 4-speed
    * 5.7 L Vortec 5700 gasoline V8 TBI/GM 4L80-E 4-speed
    * 6.5 L turbo Detroit Diesel V8/GM 4L80-E 4-speed
    * 6.6 L Duramax LLY turbo Diesel/Allison 1000 5-speed (model year 2006)

The Hummer H1 shares some common driveline parts with its HMMWV brethren. Items like brakes, differentials, frame and major body panels (hood, tailgate and quarter panels) are identical between the HMMWV and the Hummer H1. All Hummer H1s and HMMWVs come off the same first stage assembly line, and then are separated midway to either become a military HMMWV or a civilian H1.

Hummer H1s are unique in the way they handle off road. They are inherently very stable, thanks to their wide stance. They also can ford 30 inches (76 cm) of water, climb a 22-inch (56 cm) step, have a stock ground clearance of 16 inches (41 cm) (thanks to its design of tucking driveline components inside a channel, which subsequently intrudes into the cabin space of the vehicle), have approach/departure angles of 72/37.5 degrees and most H1s are equipped with Central Tire Inflation System (CTIS), which enables the driver to increase or decrease the tire air pressure at will.

Hummer H1s have many unusual features. They use inboard brakes. They have geared hubs, allowing the drivetrain's half shafts to be up high for greater clearance. The radiator is up high, sloping back over the engine. Rather than using simple runflat tires, aluminum or rubber inserts are an optional feature for runflat ability. A central tire inflation system is available as an option. Chemical warfare resistant paint is available only on the military version.

Hummer H1 Alpha Concept, 2001

2011-02-09T04:23:00.000-08:00

Hummer H1 Alpha Concept, 2001

The Hummer H1 is a civilian vehicle based on the High Mobility Multipurpose Wheeled Vehicle (HMMWV), popularly known as the Humvee, which was created by AM General.

History
Originally released in the civilian market in 1992, the Hummer H1 owes its birth to the popularity of photos from Operation Desert Storm and the enthusiastic campaign from actor Arnold Schwarzenegger, who personally owns several variants of Hummer vehicles. GM announced that 2006 would be the last model year for the Hummer H1 with production winding down in June 2006, due to a new emission laws for Diesel engine vehicles which take effect in 2007. No version of the Hummer H1 ever produced would meet these new standards. AM General currently has orders for an excess of 50,000 new HMMWVs to be produced between 2006-2009 for the United States Military. AM General also will continue to produce the H1, just not the Alpha. These vehicles will be sold through Fleet sales. The next H1 will most-likely bear a refined version of the prior 6.5L Turbo Diesel engine, but that has not been confirmed. Selling the H1's through fleet sales will allow the AM General to not be subjected to the new emission rules and regulations. AM General has sufficient fleet orders to produce 600-800 units per year right now.

Specifications
The Hummer H1 has three common variants: a convertible-like soft top, a four-door hard top pickup truck and a Wagon body version. Other less known variants include a two-door pickup truck and a four-door slantback. At this time, the convertible/soft top and the station wagon versions are the only ones available in the mass market. The two door and four door pickup versions are only available in fleet livery.

Five engine types and three automatic transmission types can be found in Hummer H1s. The common engine/transmission combinations are:

    * 6.2 L Detroit Diesel V8/GM TH400/3L80 3-speed
    * 6.5 L Detroit Diesel V8/GM 4L80-E 4-speed
    * 5.7 L Vortec 5700 gasoline V8 TBI/GM 4L80-E 4-speed
    * 6.5 L turbo Detroit Diesel V8/GM 4L80-E 4-speed
    * 6.6 L Duramax LLY turbo Diesel/Allison 1000 5-speed (model year 2006)

The Hummer H1 shares some common driveline parts with its HMMWV brethren. Items like brakes, differentials, frame and major body panels (hood, tailgate and quarter panels) are identical between the HMMWV and the Hummer H1. All Hummer H1s and HMMWVs come off the same first stage assembly line, and then are separated midway to either become a military HMMWV or a civilian H1.

Cadillac Eldorado, 1957

2011-01-19T03:43:00.000-08:00

Cadillac Eldorado, 1957

The Eldorado model was part of the Cadillac line from 1953 to 2002. The Cadillac Eldorado was the longest running American personal luxury car as it was the only one sold after the 1998 model year. Its main competitors included the Mark Series and the lower-priced Buick Riviera. The name Eldorado was derived from the Spanish words "el dorado", the "gilded one"; the name was given originally to the legendary chief or "cacique" of a S. American Indian tribe. Legend has it that his followers would sprinkle his body with gold dust on ceremonial occasions and he would wash it off again by diving into a lake. The name more frequently refers to a legendary city of fabulous riches, somewhere in S. America, that inspired many European expeditions, including one to the Orinoco by England's Sir Walter Raleigh.

The History
The name was proposed for a special show car built in 1952 to mark Cadillac's Golden Anniversary; it was the result of an in-house competition won by Mary-Ann Zukosky (married name = Marini), a secretary in the company's merchandising department. Another source, Palm Springs Life magazine, attributes the name to a resort destination in California's Coachella Valley that was a favorite of General Motors executives, the Eldorado Country Club. In any case, the name was adopted by the company for a new, limited-edition convertible that was added to the line in 1953.

Though cars bearing the name varied considerably in bodystyle and mechanical layout during this long period, the Eldorado models were always near the top of the Cadillac line. Nevertheless, and except for the Eldorado Brougham models of 1957-1960, the most expensive models were always the opulent, long wheel-based "Series 75" sedans and limousines.

1957
1957 saw the Eldorado (both the Biarritz convertible and the Seville hardtop) once again present an innovative rear-end design, a low, downswept fenderline capped by a pointed, in-board fin. The rear fenders were commonly referred to as "chipmunk cheeks". This concept was used for two years, but did not spawn any imitators.

1957 was chiefly notable, though, for the introduction of one of GM's most memorable designs, the Eldorado Brougham. This four-door hardtop with rear-opening rear doors was an ultra-luxury car that cost an astonishing $13,000+, more than the Rolls-Royce Silver Cloud of the same year. It featured a stainless steel roof, air suspension, the first dual headlights, the first memory power seats, and every possible kind of appearance and convenience feature that GM's most inventive minds could devise. This design ran for two years and of course sold in very small quantities (704 units in total) owing to the price. It has been estimated that GM lost $10,000 on every one, but these virtually hand-assembled cars are today among the rarest and most collectible of all postwar American models.

1959
A different Eldorado Brougham was sold for 1959 and 1960. These cars were not quite so extravagantly styled but were very unusual pieces in themselves. Priced at $13,075, they cost $1 more, each, than their older siblings. The design was 100% Cadillac but the company contracted out the assembly to Pinin Farina of Italy, with whom the division has had a long-running relationship, and these Eldorados were essentially hand-built in Italy. Their discreet, narrow taillights, nicely integrated into modest tailfins, contrasted sharply with the "rocketship" taillights and massive fins of the standard 1959 Cadillacs and were an indication of where Caddy styling would go in the next few years. However, build quality was not nearly to the standard of the Detroit hand-built 1957–1958s, and the 1959–1960 Broughams are less desirable, it seems, than the 1st generation Broughams, although their value and collectibility remain high.

The last Eldorado Seville was built in 1960. After that, the Eldorado convertible became essentially a trim version of the standard Cadillac convertible. With the end of the importation of the Italian-built Eldorados in 1960, the name entered something of a fallow period.

Cadillac Eldorado, 1956

2011-01-19T03:41:00.000-08:00

Cadillac Eldorado, 1956

The Eldorado model was part of the Cadillac line from 1953 to 2002. The Cadillac Eldorado was the longest running American personal luxury car as it was the only one sold after the 1998 model year. Its main competitors included the Mark Series and the lower-priced Buick Riviera. The name Eldorado was derived from the Spanish words "el dorado", the "gilded one"; the name was given originally to the legendary chief or "cacique" of a S. American Indian tribe. Legend has it that his followers would sprinkle his body with gold dust on ceremonial occasions and he would wash it off again by diving into a lake. The name more frequently refers to a legendary city of fabulous riches, somewhere in S. America, that inspired many European expeditions, including one to the Orinoco by England's Sir Walter Raleigh.

History
The name was proposed for a special show car built in 1952 to mark Cadillac's Golden Anniversary; it was the result of an in-house competition won by Mary-Ann Zukosky (married name = Marini), a secretary in the company's merchandising department. Another source, Palm Springs Life magazine, attributes the name to a resort destination in California's Coachella Valley that was a favorite of General Motors executives, the Eldorado Country Club. In any case, the name was adopted by the company for a new, limited-edition convertible that was added to the line in 1953.

1953
The 1953 Eldorado was a special-bodied, low-production convertible (532 units in total). It was the production version of the 1952 El Dorado "Golden Anniversary" concept car. Available in four unique colors (Aztec Red, Alpine White, Azure Blue and Artisan Ochre - the latter is a yellow hue, although it was shown erroneously as black in the color folder issued on this rare model). Convertible tops were available in either black or white Orlon. There was no special badging on the car, other than the "Eldorado" nameplate, in "gold", in the center of the dash. A hard tonneau cover, flush with the rear deck, hid the top in the open car version.
This first Eldorado had a wraparound windshield and a cut-down beltline, the latter signifying a dip in the sheetmetal at the bottom of the side windows. These two touches were especially beloved by General Motors Styling Chief Harley Earl and subsequently were widely copied by other marques. In fact, throughout the 50s, Eldorado was GM's styling leader, and since GM led the industry, where the Eldorado went, everyone else would tend to follow.

1954
In 1954, Eldorado lost its unique sheet metal, sharing its basic body shell with standard Cadillacs. Distinguished now mainly by trim pieces, this allowed GM to lower the price and they were rewarded with a substantial jump in sales.

1955
For 1955, the Eldorado's body gained its own rear end styling with high, slender, pointed tailfins. These contrasted with the rather thick, bulbous fins which were common at the time and were an example of Eldorado once again pointing the way forward.

For 1956, a two-door hardtop coupe version appeared, called the Eldorado Seville.

1957
1957 saw the Eldorado (both the Biarritz convertible and the Seville hardtop) once again present an innovative rear-end design, a low, downswept fenderline capped by a pointed, in-board fin. The rear fenders were commonly referred to as "chipmunk cheeks". This concept was used for two years, but did not spawn any imitators.

1957 was chiefly notable, though, for the introduction of one of GM's most memorable designs, the Eldorado Brougham. This four-door hardtop with rear-opening rear doors was an ultra-luxury car that cost an astonishing $13,000+, more than the Rolls-Royce Silver Cloud of the same year. It featured a stainless steel roof, air suspension, the first dual headlights, the first memory power seats, and every possible kind of appearance and convenience feature that GM's most inventive minds could devise. This design ran for two years and of course sold in very small quantities (704 units in total) owing to the price. It has been estimated that GM lost $10,000 on every one, but these virtually hand-assembled cars are today among the rarest and most collectible of all postwar American models.

1959
A different Eldorado Brougham was sold for 1959 and 1960. These cars were not quite so extravagantly styled but were very unusual pieces in themselves. Priced at $13,075, they cost $1 more, each, than their older siblings. The design was 100% Cadillac but the company contracted out the assembly to Pinin Farina of Italy, with whom the division has had a long-running relationship, and these Eldorados were essentially hand-built in Italy. Their discreet, narrow taillights, nicely integrated into modest tailfins, contrasted sharply with the "rocketship" taillights and massive fins of the standard 1959 Cadillacs and were an indication of where Caddy styling would go in the next few years. However, build quality was not nearly to the standard of the Detroit hand-built 1957–1958s, and the 1959–1960 Broughams are less desirable, it seems, than the 1st generation Broughams, although their value and collectibility remain high.

The last Eldorado Seville was built in 1960. After that, the Eldorado convertible became essentially a trim version of the standard Cadillac convertible. With the end of the importation of the Italian-built Eldorados in 1960, the name entered something of a fallow period.

Audi Coupe GT, 1985

2011-01-19T03:39:00.000-08:00

Audi Coupe GT, 1985

The Audi Coupe GT was a 2-door sports car produced and sold by Audi from 1981 to 1987. The car was an attempt by Audi to offer a more affordable version of its turbocharged, all-wheel drive Quattro. The Coupe GT featured a similar body shape to the Quattro, but without the knife-edged fender flares of the more expensive car. Mechanically, the biggest changes from the Quattro to the GT were the use of a naturally aspirated 5-cylinder engine and a front-wheel drive drivetrain.

The Audi Coupe range was fitted with the quattro All Wheel Drive system from late 1984 to produce the Audi Coupe quattro, a model which was rarer than the Turbocharged Quattro mode

Audi Sport quattro S1, 1985

2011-01-19T03:38:00.000-08:00

Audi Sport quattro S1, 1985

The Audi Sport Quattro S1 was introduced at the end of 1984 as an update to the Audi Sport Quattro. The car featured a inline 5-cylinder engine that displaced 2,110 cc (128.8 cu in) and produced an officialy quoted figure of 350 kW (480 PS/470 bhp). However, the turbocharger utilised a recirculating air system, with the aim of keeping the turbo spinning at high speed, and the actual figure was in excess of 500 bhp (373 kW/507 PS) at 8000 rpm. In addition to the improved power output, an aggressive aerodynamic kit was added that featured very distinctive wings and spoilers to the front and rear of the car to increase downforce. The weight was lightened to just 1,090 kg (2,403 lb), and now accelerate from 0-100 km/h (62 mph) in just 3.1 seconds.

Some of the cars were supplied with a "power-shift gearbox", which is said to be a forerunner of today's Direct-Shift Gearbox (DSG) technology.

The S1 proved to be an immediate success in the rally circuit, helping Walter Röhrl and Christian Geistdörfer win the 1985 San Remo Rally. A modified version of the S1, was also driven by Michèle Mouton. The S1 evolution would become the final Group B car produced by Audi, with the works team withdrawing from the Championship following the 1986 rally in Portugal.

Twenty years after the cancellation of Group B, the Sport Quattro S1 was still widely regarded as the most powerful rally car ever fielded in international competition, with the final factory machines of 1986 rated at an incredible 441 kW (600 PS/591 bhp).

In addition to Group B competition, the S1 won the 1985 Pikes Peak International Hill Climb with Michèle Mouton in the driving seat, setting a world record time in the process. This victory was repeated in 1987, this time at the hands of Walter Röhrl, and again in 1988 (Michèle Mouton) and 1989 (Bobby Unser), completing a hat-trick.

Bentley T1, 1966

2011-01-10T16:30:00.000-08:00

Bentley T1, 1966

The Bentley T-Series was even more rarely built than the Rolls Royce Silver Shadow. The Bentley being technically an identical twin of the Rolls Royce seems to have been bought mostly by owners wishing a little more understatement. The formerly more sportive image of Bentley motor cars differing from Rolls Royces was gone by the time the Silver Shadow/Bentley T was introduced and thus couldn't motivate buyers any more. The outward appearance of a Bentley T is slightly more dynamic because the bonnet design is a few centimeters lower and the radiator shell shape with its rounded edges is smoother.

The T1 was made from 1967-1977 and the T2 was made from 1977-1980.

Production
T1: 1868
- T1 saloon (1965-1977): 1703
- T1 long wheelbase (1971-1976): 9
- Bentley T1 two door saloon (1966-1971): 114 (15 by James Young)
- T1 coupé by Pininfarina (1968): 1
- T1 convertible (1967-1971): 41
T2: 568
- T2 (1977-1980): 558
- T2 long wheelbase (1977-1980): 10

Bentley S1 Continental, 1956

2011-01-10T16:29:00.000-08:00

Bentley S1 Continental, 1956

The Bentley S1 was a luxury car produced by Bentley Motors Limited from 1955 through 1959. It marked Bentley parent, Rolls-Royce, reducing the differences between their Bentley and Roll-Royce models, with the S1 differing only in its radiator design and badging from the Rolls-Royce Silver Cloud I.

The models shared the 4.9 L (4887 cc/298 in³) straight-6 engine, with this being the last vehicle to use this engine. The bore was 95.25 mm (3.7 in) and the stroke was 114.3 mm (4.5 in). Twin SU carburetors were fitted, with upgraded models from 1957. A 4-speed automatic transmission was standard, with a 4-speed manual available as an option. Two wheelbases were produced: 123 in (3124 mm) and, from 1957, 127 in (3226 mm).

A somewhat sportier coachbuilt-only S1 Continental was introduced six months later.

Production
S1: 3072 (145 with coachbuilt bodies)
S1 long wheelbase: 35 (12 with coachbuilt bodies)
S1 Continental: 431

Acura 3.2 CL Type-S, 2003

2011-01-10T16:26:00.000-08:00

Acura 3.2 CL Type-S, 2003

For the 2003 model year, Acura's goals for the 3.2 CL were to:
Increase performance
Update styling for a sleeker, more aggressive look

In support of those goals, the 2003 3.2 CL has received the following enhancements:

Powertrain
While it continues to come with a 5-speed Sequential SportShift automatic transmission, the CL Type-S now offers a new close ratio 6-speed manual transmission as well. Models with the new manual transmission also feature:
- Helical limited slip differential
- Curb weight of 3446 lbs. (compared to 3510 lbs. for the CL Type-S with automatic transmission)
- Multi-cone synchronizers
- Self-adjusting clutch with dual-mass flywheel
- Short-throw shift linkage

Chassis
+ CL Type-S with manual transmission replaces the VSA found in the CL Type-S with automatic transmission with new helical limited slip differential
+ New 6-spoke 16 inch wheels (3.2 CL)
+ New 6-spoke 17 inch wheels (CL Type-S)
+ CL Type-S with manual transmission adds two hydraulic engine mount dampers to counter engine movement

Body
Front Styling
+ Revised grille with body-colored surround
+ Revised headlights with black accents
Rear Styling
+ Revised taillight lenses with clear upper portion
+ New exhaust finishers

Safety/Convenience
+ OnStar(R) is standard equipment on CL models equipped with the Acura Satellite-Linked Navigation System
+ Lower Anchors and Tethers for Children (LATCH) System added on outboard rear seats for child safety seat attachment
+ Driver's Dual Stage Supplemental Restraint System (SRS)
+ Auto-up driver's side window

Interior Styling
CL Type-S
+ Models with black interiors receive titanium-look trim on doors and center console
+ In models with 6-speed manual transmission, center console redesigned to accommodate manual shifter and hand-operated parking brake
+ Perforated leather door inserts

Acura TL ASPEC Concept, 2003

2011-01-10T16:24:00.000-08:00

Acura TL ASPEC Concept, 2003

Powertrain

+ 300+ horsepower, powertrain including:
- Performance-tuned 3.2-liter, 24-valve, V-6 engine
- High flow intake and exhaust
- 6-speed close-ratio manual transmission with limited-slip differential

Suspension
+ A-SPEC high performance suspension with track-tuned shocks and springs
+ 21-inch prototype alloy wheels
+ High performance tires
+ Brembo 4-wheel disc brakes with 8-piston calipers and 15-inch rotors

Body/Styling
+ Panoramic glass roof
+ Larger, high-flow exhaust finishers
+ 42 mm wider track
+ Wider fender flares
+ Trunk lid spoiler
+ Redesigned front bumper with larger Acura grille and lower air intakes
+ Redesigned rear bumper
+ 3-stage silver-gray Mica Pearl paint
+ New finish treatment on headlights/tail lights, clear side indicators

Interior
+ Premium Matador Red sport/luxury interior
+ Deeply bolstered custom leather seats with heating and cooling ventilation
+ Ultra suede headliner
+ Carbon/Kevlar accents on door panels and center console
+ Carbon/Kevlar sport steering wheel
+ Aluminum shift knob and foot pedals
+ Rear bucket seats with storage

Technology/Safety
+ Adaptive Cruise Control
+ Rearview camera

Mercury Marauder Concept, 2002

2011-01-03T17:21:00.000-08:00

Mercury Marauder Concept, 2002

From 2003 to 2004, Ford produced the Marauder as a "high-performance" version of the Mercury Grand Marquis sedan.
The 2003 Mercury Marauder was based on the Ford Panther platform which utilizes a hydroformed steel frame, front rack and pinion steering, in addition to totally revised front and rear suspension with monotube shock absorbers, the Marauder also had a naturally aspirated 4.6 L DOHC V8 with 302 hp and 318 ft·lbf torque. 2004 was the last year for this Marauder mostly due to lackluster sales, blamed by some on bland styling and an incorrect target audience. Originally, they were produced in "any color the customer desired, so long as it was black." Eventually, the Marauder was offered in silver, blue, and red but in limited quantities.

After the Marauder was discontinued, the Ford Crown Victoria LX Sport remains and bears a similar appearance to the Marauder but is powered by the lesser 4.6 L 2-valve SOHC V8 engine rated at 239 hp. The LX Sport still offers the same exterior and interior colors of the Marauder, however it uses wood grain trim on the dashboard and doors, unlike the Marauder, which used aluminum.

Total production for the 2003 - 2004 Mercury Marauder was 11,052:
* 2003 - Total: 7839 (328 Blue, 417 Silver, 7094 Black)
* 2004 - Total: 3213 (980 Dark Toreador Red, 997 Silver, 1236 Black)

McLaren F1 GTR, 1995

2011-01-03T17:18:00.000-08:00

McLaren F1 GTR, 1995

Built at the request of race teams, such as those owned by Ray Bellm and Thomas Bscher, in order to compete in the BPR Global GT Series, the McLaren F1 GTR was a custom built race car which introduced a modified engine management system that increased power output — however, air-restrictors mandated by racing regulations reduced the power back to 600 hp (447 kW) at 7500 RPM. The cars extensive modifications included changes to body panels, suspension, aerodynamics and the interior. The McLaren F1 GTR would go on to take its greatest achievement with 1st, 3rd, 4th, 5th, and 13th places in the 1995 24 Hours of Le Mans, beating out custom built prototype sports cars.

In total, nine McLaren F1 GTRs would be built for 1995.

McLaren F1 GTR '96
To follow up on the success of the McLaren F1 GTR into 1996, McLaren further developed the '95 model, leading to a size increase but weight decrease. Nine more F1 GTRs were built to 1996 spec, while some 1995 cars were still campaigned by privateers. McLaren F1 GTR '96 chassis #14R is notable as being the first non-Japanese car to win a race in the All-Japan Grand Touring Car Championship (JGTC). The car was driven by David Brabham and John Nielsen. The weight was reduced with around 100 kg from the 1995 GTR edition and the engine was kept detuned at 600 HP to comply with racing regulations.

McLaren F1 GTR '97
With the F1 GT homologated, McLaren could now develop the McLaren F1 GTR for the 1997 season. Weight was further reduced and a sequential transaxle was added. The engine was slightly destroked to 6.0L instead of the previous 6.1L. Due to the heavily modified bodywork, the McLaren F1 GTR '97 is often referred to as the "Longtail" thanks to the rear bodywork being extended to increase rear downforce. A total of ten McLaren F1 GTR '97s were built. The weight was reduced to a total of 910 kg.

McLaren F1, 1993

2011-01-03T17:13:00.000-08:00

McLaren F1, 1993

The McLaren F1 is a sports car designed and manufactured by Gordon Murray and McLaren Automotive. On March 31, 1998, it set the record for the fastest production car in the world, 240 mph (391 km/h). As of April 2009, the McLaren F1 is succeeded by three faster cars in sheer top speed, but is still the fastest naturally aspirated production car.

The car features numerous proprietary designs and technologies. It is lighter and has a more streamlined structure than even most of its modern rivals and competitors despite having one seat more than most similar sports cars, with the driver's seat located in the middle. It features a powerful engine and is somewhat track oriented, but not to the degree that it compromises everyday usability and comfort. It was conceived as an exercise in creating what its designers hoped would be considered the ultimate road car. Despite not having been designed as a track machine, a modified race car edition of the vehicle won several races, including the 24 Hours of Le Mans in 1995, where it faced purpose-built prototype race cars. Production began in 1992 and ended in 1998. In all, 106 cars were manufactured, with some variations in the design.

Chief engineer Gordon Murray's design concept was a common one among designers of high-performance cars: low weight and high power. This was achieved through use of high-tech and expensive materials like carbon fibre, titanium, gold, magnesium and kevlar. The McLaren F1 was the first production car to use a carbon-fibre monocoque chassis.

The idea was first conceived when Murray was waiting for a flight home from the fateful Italian Grand Prix in 1988; Murray drew a sketch of a three seater sports car and proposed it to Ron Dennis, pitched as the idea of creating the ultimate road car, a concept that would be heavily influenced by the Formula One experience and technology of the company and thus reflect that skill and knowledge through the McLaren F1.

Engine
Gordon Murray insisted that the engine for this car be naturally aspirated to increase reliability and driver control. Turbochargers and superchargers increase power but they increase complexity and can decrease reliability as well as introducing an additional aspect of latency and loss of feedback, the ability of the driver to maintain maximum control of the engine is thus decreased. Murray initially approached Honda for an NA powerplant with 550 bhp (410 kW; 560 PS), 600 mm (23.6 in) block length and a total weight of 250 kg (551 lb), it should be derived from the Formula One powerplant in the then-dominating McLaren/Honda cars.

When Honda refused, Isuzu, then planning an entry into Formula One, had a 3.5 V12 engine being tested in a Lotus chassis. The company was very interested in having the engine fitted into the McLaren F1. However, the designers wanted an engine with a proven design and a racing pedigree.

The final result is a custom-built 6.1 L (6064 cc) 60-degree V12 with an aluminium alloy block and head, 86 mm (3.4 in) x 87 mm (3.4 in) bore/stroke, quad overhead camshafts for maximum flexibility of control over the four valves per cylinder and a chain drive for the camshafts for maximum reliability, the engine is dry sump. At 266 kg (586 lb), the resulting engine was slightly heavier than Murray's original maximum specification weight of 250 kg (551 lb) but was also considerably more powerful than he had specified. The bespoke engineered engine for the McLaren F1 is called the BMW S70/2.

The carbon fibre body panels and monocoque required significant heat insulation in the engine compartment, so Murray's solution was to line the engine bay with a highly efficient heat-reflector: gold foil. Approximately 25 g (0.8 ounce) of gold was used in each car.

The road version used a compression ratio of 11:1 to produce 627 hp (468 kW; 636 PS) at 7400 rpm—considerably more than Murray's specification of 550 horsepower (404 kW). Torque output of 480 ft·lb (651 N·m) at 5600 rpm. The engine has a redline rev limiter set at 7500 rpm.

In contrast to raw engine power, a car's power-to-weight ratio is a better method of quantifying acceleration performance than the peak output of the vehicle's powerplant. The standard McLaren F1 achieves 550 hp/ton (403 kW/tonne), or just 3.6 lb/hp. Compare with the Ferrari Enzo at 434 hp/ton (314 kW/tonne) (4.6 lb/hp), the Bugatti Veyron at 530.2 hp/ton (395 kW/tonne) (4.1 lb/hp), and the SSC Ultimate Aero TT with an alleged 1003 hp/ton (747.9 kW/tonne) (2 lb/hp).

The cam carriers, covers, oil sump, dry sump, and housings for the camshaft control are made of magnesium castings. The intake control features twelve individual butterfly valves and the exhaust system has four Inconel catalysts with individual Lambda-Sond controls. The camshafts are continuously variable for increased performance, using a system very closely based on BMW's VANOS variable timing system for the BMW M3; it is a hydraulically-actuated phasing mechanism which retards the inlet cam relative to the exhaust cam at low revs, which reduces the valve overlap and provides for increased idle stability and increased low-speed torque. At higher RPM the valve overlap is increased by computer control to 42 degrees (compare 25 degrees on the M3) for increased airflow into the cylinders and thus increased performance.

To allow the fuel to atomise fully the engine uses two Lucas injectors per cylinder, with the first injector located close to the inlet valve - operating at low engine RPM - while the second is located higher up the inlet tract - operating at higher RPM. The dynamic transition between the two devices is controlled by the engine computer.

Each cylinder has its own miniature ignition coil. The closed-loop fuel injection is sequential. The engine has no knock sensor as the predicted combustion conditions would not cause this to be a problem. The pistons are forged in aluminium.

Every cylinder bore has a nikasil coating giving it a high degree of wear resistance.
From 1998 to 2000, the Le Mans-winning BMW V12 LMR sports car used a similar S70/2 engine.

Chassis and body
The McLaren F1 was the first production road car to use a complete carbon fiber reinforced plastic (CFRP) monocoque chassis structure. Aluminium and magnesium was used for attachment points for the suspension system, inserted directly into the CFRP.

The car features a central driving position - the driver's seat is located in the middle, ahead of the fuel tank and ahead of the engine, with a passenger seat slightly behind and on either side. The doors on the vehicle move up and out when opened, and are thus of the type butterfly doors.

The engine produces high temperatures under full application and thus cause a high temperature variation in the engine bay from no operation to normal and full operation. CFRP becomes mechanically stressed over time from high heat transfer effects and thus the engine bay was decided to not be constructed from CFRP.

Aerodynamics
The overall drag coefficient on the standard McLaren F1 is 0.32, compared with 0.36 for the faster Bugatti Veyron, and 0.357 for the current holder of the fastest car world record (as of 2008) - the SSC Ultimate Aero TT (in terms of top speed). The vehicle's frontal area is 1.79 square meters and the total Cx is 0.57. Due to the fact that the machine features active aerodynamics these are the figures presented in the most streamlined configuration.

The normal McLaren F1 features no wings to produce downforce (compare the LM and GTR editions), however the overall design of the underbody of the McLaren F1 in addition to a rear diffuser exploits ground effect to improve downforce which is increased through the use of two electric fans to further decrease the pressure under the car. A "high downforce mode" can be turned on and off by the driver. At the top of the vehicle there is an air intake to direct high pressure air to the engine with a low pressure exit point at the top of the very rear. Under each door is a small air intake to provide cooling for the oil tank and some of the electronics. The airflow created by the electric fans not only increase downforce, but the airflow that is created is further exploited through design, by being directed through the engine bay to provide additional cooling for the engine and the ECU. At the front, there are ducts assisted by an electric suction fan for cooling of the front brakes.

Suspension
Steve Randle who was the car's dynamicist was appointed responsible for the design of the suspension system of the McLaren F1 machine. It was decided that the ride should be comfortable yet performance oriented, however not as stiff and low as that of a true track machine, as that would imply reduction in practical use and comfort as well as increasing noise and vibration, which would be a contradictory design choice in relation to the former set premise - the goal of creating the ultimate road car.

From scratch the design of the McLaren F1 vehicle had strong focus on centering the mass of the car as near the middle as possible by extensive manipulation of placement of i.a. the engine, fuel and driver, allowing for a low polar moment of inertia in yaw. The McLaren F1 has 42% of its weight at the front and 58% at the rear, this figure changes less than 1% with the fuel load.

The distance between the mass centroid of the car and the suspension roll centre were designed to be the same front and rear to avoid unwanted weight transfer effects. Computer controlled dynamic suspension were considered but not applied due to the inherent increase in weight, increased complexity and loss of predictability of the vehicle.

Damper and spring specifications: 90 mm (3.5 in) bump, 80 mm (3.1 in) rebound with bounce frequency at 1.43 Hz at front and 1.80 Hz at the rear, despite being sports oriented these figures imply the rather soft ride and will inherently decrease track performance, but again, the McLaren F1 is not in concept nor implementation a track machine. As can be seen from the McLaren F1 LM, McLaren F1 GTR et al., the track performance potential is much higher than that in the stock McLaren F1 due to fact that car should be comfortable and usable in everyday conditions.

The suspension is a double wishbone system with an interesting design, i.a. that longitudinal wheel compliance is included without loss of wheel control, which allows the wheel to travel backwards when it hits a bump - increasing the comfort of the ride.

Castor wind-off at the front during braking is handled by McLaren's proprietary Ground Plane Shear Centre - the wishbones on either side in the subframe are fixed in rigid plane bearings and connected to the body by four independent bushes which are 25 times more stiff radially than axially. This solution provides for a castor wind-off measured to 1.02 degrees per G of braking deceleration. Compare the Honda NSX at 2.91 degrees per G, the Porsche 928 S at 3.60 degrees per G and the Jaguar XJ6 at 4.30 degrees per G respectively. The difference in toe and camber values are also of very small under lateral force application. Inclined Shear Axis is used at the rear of the machine provides measurements of 0.04 degrees per G of change in toe-in under braking and 0.08 degrees per G of toe-out under traction.

When developing the suspension system the facility of electro-hydraulic kinematics and compliance at Anthony Best Dynamics was employed to measure the performance of the suspension on a Jaguar XL16, a Porsche 928S and a Honda NSX to use as references.

Steering knuckles and the top wishbone/bell crank are also specially manufactured in an aluminium alloy. The wishbones are machined from a solid aluminium alloy with CNC machines.

Tyres
The McLaren F1 uses 235/45ZR17 front tyres and 315/45ZR17 rear tyres. These are specially designed and developed solely for the McLaren F1 by Goodyear and Michelin. The tyres are mounted on 17x9 inches and 17x11.5 inches cast magnesium wheels, protected by a tough protective paint. The five-spoke wheels are secured with magnesium retention pins.

The turning circle from curb to curb is 13 m (42.7 ft), allowing the driver two turns from lock to lock.

Brakes
The McLaren F1 features unassisted, vented and crossdrilled brake discs made by Brembo. Front size is 332 mm (13.1 in) and at the rear 305 mm (12.0 in). The calipers are all four-pot, opposed piston types, and are made of aluminium. The rear brake calipers do not feature any handbrake functionality, however there is a mechanically actuated, fist-type caliper which is computer controlled and thus serves as a handbrake.

To increase caliper stiffness the calipers are machined from one single solid piece (in contrast to the more common being bolted together from two halves). Pedal travel is slightly over one inch. Activation of the rear spoiler will allow the air pressure generated at the back of the vehicle to force air into the cooling ducts located at either end of the spoiler which become uncovered upon application of it.

Servo assisted ABS brakes were ruled out as they would imply increased mass, complexity and reduced brake feel; however at the cost of increasing the required skill of the driver.

Gordon Murray attempted to utilize carbon brakes for the McLaren F1, but found the technology not mature enough at the time; with one of the major culprits being that of a proportional relationship between brake disc temperature and friction—i.e. stopping power—thus resulting in relatively poor brake performance without an initial warm-up of the brakes prior to use. As carbon brakes have a more simplified application envelope in pure racing environments this allows for the racing edition of the machine, the McLaren F1 GTR, to feature ceramic carbon brakes.

Gearbox and miscellaneous
The standard McLaren F1 has a transverse 6-speed manual gearbox with an AP carbon triple-plate clutch contained in an aluminium housing. The second generation GTR edition has a magnesium housing. Both the standard edition and the 'McLaren F1 LM' have the following gear ratios: 3.23:1, 2.19:1, 1.71:1, 1.39:1, 1.16:1, 0.93:1, with a final drive of 2.37:1, the final gear is offset from the side of the clutch. The gearbox is proprietary and was developed by Weismann. The Torsen LSD (Limited Slip Differential) has a 40% lock.

The McLaren F1 has an aluminium flywheel that has only the dimensions and mass absolutely needed to allow the torque from the engine to be transmitted. This is done in order to decrease rotational inertia and increase responsiveness of the system, resulting in faster gear changes and better throttle feedback. This is possible due to the McLaren F1 engine lacking secondary vibrational couples and featuring a torsional vibration damper by BMW.

Interior and equipment
Standard equipment on the stock McLaren F1 includes full cabin air conditioning, a rarity on most sports cars and a system design which Murray again credited to the Honda NSX, a car he had owned and driven himself for 7 years without, according to the official McLaren F1 website, ever needing to change the AC automatic setting. Further comfort features included SeKurit electric defrost/demist windscreen and side glass, electric window lifts, remote central locking, Kenwood 10-disc CD stereo system, cabin access release for opening panels, cabin storage department, four lamp high performance headlight system, rear fog and reversing lights, courtesy lights in all compartments, map reading lights and a gold-plated Facom titanium tool kit and first aid kit (both stored in the car). In addition tailored, proprietary luggage bags specially designed to fit the vehicle's carpeted storage compartments, including a tailored golf bag, were standard equipment. Airbags are not present in the car.

All features of the McLaren F1 were according to Gordon Murray obsessed over, which included the interior. The metal plates fitted to improve aesthetics of the cockpit are claimed to be 20/1000s of an inch thick to save weight. The driver's seat of the McLaren F1 is custom fitted to the specifications desired by the customer for optimal fit and comfort; the seats are hand made from CFRP and covered in light Connolly leather. By design the F1 steering column can not be adjusted, however prior to production each customer specifies the exact preferred position of the steering wheel and thus the steering column is tailored by default to those owner settings; the same holds true for the pedals, which are not adjustable after the car has left the factory, but like the steering column the pedals are also tailored to each specific customer.

During its pre-production stage, McLaren commissioned Kenwood to create a lightweight car audio system for the car; Kenwood, between 1992 and 1998 used the McLaren F1 to promote its products in print advertisements, calendars and brochure covers. Each car audio system was especially designed to tailor to an individual's listening taste, however radio was omitted because Murray never listened to the radio.

Every standard McLaren F1 also has a modem which allows customer care to remotely fetch information from the ECU of the car in order to help aid in the event of a failure of the vehicle.

Purchase and maintenance
Only 106 cars were manufactured, 64 of which were the standard street version (F1), 5 were LMs (tuned versions), 3 were longtail roadcars (GT), 5 prototypes (XP), 28 racecars (GTR), and 1 LM prototype (XP LM). Production began in 1992 and ended in 1998. At the time of production one machine took around 3.5 months to make.

Up until 1998, when McLaren produced and sold the standard McLaren F1 models, they had a price tag of around 970 000 USD. The cars can sell for up to nearly twice that of the original price, due to the performance and exclusivity of the machine. They are expected to further increase in value over time.

McLaren M6GT, 1969

2011-01-03T17:06:00.000-08:00

McLaren M6GT, 1969

The McLaren M6A was a racing car developed by driver Bruce McLaren and his Bruce McLaren Motor Racing team for their entry in 1967 Can-Am season. As a replacement for the team's M1Bs from 1966, the Chevrolet-powered McLaren M6A's improved design earned Bruce McLaren and his team their first of multiple Can-Am championships. After the McLaren M6A were replaced by the M8A in preparation for 1968, McLaren and technical partner Trojan developed the M6B which was sold to customers for use in Can-Am as well as other racing series.

The M6 name was later used in the development of a closed-cockpit sports car for the 24 Hours of Le Mans and known as the M6GT. The company's plan to homologate it for the FIA's Group 4 regulations was however never completed, and only a few M6GT prototypes were finished by McLaren and Trojan. Two M6GTs were later converted to road cars, one of which became Bruce McLaren's personal transport.

Development
Bruce McLaren gathered several designers to develop the McLaren M6A during the off-season in early 1967. Along with McLaren himself, Robin Herd, Gordon Coppuck, Tyler Alexander, and Don Beresford all worked on the layout of the McLaren M6A's chassis and bodywork. The car featured the first monocoque chassis constructed by McLaren, while the bodywork was specifically shaped to increase downforce suited for the Can-Am circuits. McLaren's team also expanded into engine development, creating a fuel injection system for their Chevrolet V8s. Another addition to the team was a new tire supplier, with Goodyear replacing Firestone in exchange for a testing and development program.

The first McLaren M6A was completed in spring 1967, and brought to the nearby Goodwood Circuit for testing. Bruce McLaren Motor Racing carried out over 2000 miles of testing at the circuit in preparation for the upcoming Can-Am season, tuning the car as well as gathering data for Goodyear's use. As two further McLaren M6A were completed, the team shipped the cars to North America to prepare for the opening race of the season. A final addition to the cars was a coat of orange paint. This new McLaren Orange color scheme would eventually become synonymous with Bruce McLaren and the team.

After the retirement of the McLaren M6A, McLaren entrusted Trojan with constructing duplicates which could be sold to customers. These M6Bs were nearly identical to the McLaren M6A but were sold without an engine. Several other M6Bs were also modified to fit closed-cockpit bodywork.

Racing history
The 1967 Can-Am season began in September at Road America. Bruce McLaren's M6A qualified on pole position with a new track record, while teammate Denny Hulme's car led once the race began. Although McLaren's car suffered an oil leak and failed to finish, Hulme was able to earn the car's first victory. The next two events had the team running away from the opposition, with Hulme and McLaren finishing first and second consecutively. The roles were however swapped over the next two races as it was McLaren who won on both occasions, but problems with Hulme's car allowed McLaren to take the lead in the points standings going into the final round. For the finale at the Stardust Grand Prix, problems with the Chevrolet motors led to blown engines and neither car reaching the finish. However, with their performance over the season, Bruce McLaren secured the 1967 Can-Am Challenge Cup, while Hulme was ranked second only three points behind.

As Bruce McLaren Motor Racing moved to developing the M8A, the M6Bs began to be delivered to customers for the 1968 season. Several of the McLaren M6A were also sold with Roger Penske purchasing one car for defending United States Road Racing Championship (USRRC) champion Mark Donohue. Donohue won several USRRC events that season and earned his second championship. Donohue also later won a race in Can-Am, beating the newer McLaren M8As. After the cancellation of the USRRC after 1968, the M6As and M6Bs continued to be used into the early 1970s but none were able to achieve victory against their newer competitors.

Oldsmobile Alero Concept, 1997

2011-01-03T16:56:00.000-08:00

Oldsmobile Alero Concept, 1997

The Oldsmobile Alero was introduced in spring 1998 as a 1999 model to replace the Achieva and Cutlass. The Alero went into production on April 6, 1998. All Aleros were built in Lansing, Michigan. The Alero was Oldsmobile's last compact car as well as the last vehicle sold under the brand. Production ended on April 29, 2004.

History
The design of the Alero was originally previewed in 1997 with the Alero Alpha concept car, a futuristic V6-powered sport coupe that featured many design elements seen in the production Alero as well as some that were never meant for production.

The Alero was sold either as a 4-door sedan or as a 2-door coupé. It shared its chassis and many parts, including engines, with the Pontiac Grand Am. It was part of the GM N platform.

In 2003, the Alero's daytime running lights were changed from high-beam to low-beam.

The Alero was also sold in select European countries as the Chevrolet Alero, although only available as a sedan. The car still featured its Oldsmobile badges even though sold under the Chevrolet brand, since most European consumers would not recognize what the badge stood for. Chevrolet badges were added to the grille and rear fascia during the 2000 model year. The Toronado was sold similarly.

Alero production ended with a special Final 500 Edition. These last 500 Aleros featured custom graphics inspired by vintage Oldsmobile logos, dark cherry metallic paint, and a plate featuring the car's number out of 500.

The final Alero Final 500 Edition (#500 of 500) also happened to be the final Oldsmobile ever built, and was signed under its hood by the employees of the General Motors Lansing plant and then given to the R.E. Olds Transportation Museum.

A preview of the planned replacement for the Alero was seen in 2001 with the unveiling of the "O4" concept, designed by Bertone. The car was an open top 4-seater with European styling but some Oldsmobile traits, and powered by the latest Ecotec I4 engine. The name had multiple meanings, including "Oldsmobile 4-Seater" as well as implying the year 2004 as a planned date for production.

Unfortunately, the O4 concept was unveiled a few weeks after General Motors announced that they would be phasing out the Oldsmobile brand, meaning that production possibilities of the O4 would never see reality. Because of this, a second generation Alero was never built and the car was phased out in 2004.

Variant prototypes
General Motors commissioned the construction of Alero prototypes either for testing or to gather public opinion on possible future plans for the Alero. These variants:

Alero OSV - "Oldsmobile Speciality Vehicle", an experiment in an aftermarket parts brand for Oldsmobile. Featured a body kit, supercharged I4, custom interior, and special cherry red paint.
Alero OSV II - Another experimental vehicle, this time featuring an LX5 DOHC 3.5L V6 (used in the Oldsmobile Intrigue and Aurora and featured custom dark green paint.
Alero 442 - A set of show cars based on the Alero coupe fitted with a body kit similar in design to the Oldsmobile 442. Each Alero 442 show car had a unique color, including white with gold stripes and white with pink stripes.
Alero California - A custom built version of the Alero coupe featuring racing parts including a large rear wing, racing seats, sport tires, and custom graphics painted in brown and yellow.
Alero Convertible - An experiment in the possibility of creating an Alero with a convertible soft top to help broaden the appeal of the car to young buyers. The Oldsmobile O4 concept also hinted that the next generation Alero could have had a convertible model.
Alero Pace Car - Built by General Motors as part of their fleet of Oldsmobile safety cars for the Indy Racing League, featuring custom yellow and white checkered flag graphics.

Oldsmobile Aerotech Concept, 1988

2010-12-27T17:21:00.000-08:00

Oldsmobile Aerotech Concept, 1988

Mini Cooper S, 1968

2010-12-27T17:19:00.000-08:00

Mini Cooper S, 1968

The Mini is a small car that was produced by the British Motor Corporation (BMC) and its successors from 1959 to 2000. The most popular British-made car, it has since been replaced by the New MINI which was launched in 2001. The original is considered an icon of the 1960s, and its space-saving front-wheel-drive layout influenced a generation of car-makers. In the international poll for the award of the world's most influential car of the twentieth century the Mini came second after the Ford Model T.

The revolutionary and distinctive two-door car was designed for BMC by Sir Alec Issigonis (1906–88). It was manufactured at the Longbridge and Cowley plants in the United Kingdom, and later in Australia, Belgium, Chile, Italy, Portugal, South Africa, Spain, Uruguay, Venezuela and Yugoslavia. The Mini Mk I had three major updates: The Mk II, the Clubman, and the Mk III, within which were a series of variations including an estate car, a pickup truck, a van, and the Mini Moke — a jeep-like buggy. The Mini Cooper and Cooper "S" were sportier versions that were successful as rally cars — winning the Monte Carlo Rally three times.

Design and development
Designed as project ADO15 (Austin Drawing Office project number 15), the Mini came about because of a fuel crisis. In 1956 as a result of the Suez Crisis, which reduced oil supplies, the United Kingdom saw the re-introduction of petrol rationing. Sales of large cars slumped, and there was a boom in the market for so called bubble cars, which were mainly German in origin. Leonard Lord, the somewhat autocratic head of BMC, decreed that something had to be done and quickly. He laid down some basic design requirements: the car should be contained within a box that measured 10 × 4 × 4 feet (3 × 1.2 × 1.2 m); and the passenger accommodation should occupy six feet (1.8 m) of the 10 foot (3 m) length; and the engine, for reasons of cost, should be an existing unit. Issigonis, who had been working for Alvis, had been recruited back to BMC in 1955 and, with his skills in designing small cars, was a natural for the task. The team that designed the Mini was remarkably small; as well as Issigonis, there was Jack Daniels, who had worked with him on the Morris Minor, Chris Kingham, who had been with him at Alvis, two engineering students and four draughtsmen. Together, by October 1957 they had designed and built the original prototype, which was affectionately named 'The Orange Box' because of its colour.

The ADO15 used a conventional BMC A-Series four-cylinder water-cooled engine, but departed from tradition by having it mounted transversely, placing the engine oil lubricated, four-speed transmission in the sump, and by employing front-wheel drive. Almost all small front-wheel-drive cars developed since the 1970s have used a similar configuration. The radiator was mounted at the left side of the car so that the engine-mounted fan could be retained, but with reversed pitch so it blew air into the natural low pressure area under the front wing. This location saved precious vehicle length, but had the disadvantage of feeding the radiator with air that had been heated by passing over the engine.

The suspension system, designed by Alex Moulton at Moulton Developments Limited, used compact rubber cones instead of conventional springs — this led to a rather raw and bumpy ride, but this rigidity, together with the wheels being pushed out to the corners of the car, gave the car its famous go kart-like handling. It was initially planned to use an interconnected fluid system, similar to the one which Issigonis and Moulton were working on in the mid-1950s at Alvis, but the short development time of the car meant this would not be ready in time for the launch. The system intended for the Mini was further developed to become the hydrolastic system and was first used on the Austin 1100 (launched in 1962). Ten-inch wheels were specified, so new tyres needed to be developed — with the initial contract going to Dunlop.

The car was designed with sliding windows in the doors, thus allowing for storage pockets to be fitted in the space where a winding window mechanism would have been. Issigonis is said to have sized the resulting storage bins to take a bottle of his favourite Gordon's Gin. The boot lid was designed with the hinges at the bottom so that the car could be driven with it open to increase luggage space. On early cars the number plate was hinged so it dropped down to remain visible when the boot lid was open.

To keep manual labour costs low, the car was designed with quirky welded seams that are visible on the outside of the car running down the A and C pillars and between the body and the floor pan. To further simplify construction, the car had external door and boot hinges.

The Mini Cooper and Cooper S – 1961–2000
Issigonis' friend John Cooper, owner of the Cooper Car Company, designer and builder of Formula 1 and rally cars, saw the potential of the Mini. Issigonis was initially reluctant to see the Mini in the role of a performance car - but after John Cooper appealed to BMC management, the two men collaborated to create the Mini Cooper. The Austin Mini Cooper and Morris Mini Cooper debuted in 1961.

The original 848 cc engine from the Morris Mini-Minor was increased to 997 cc, boosting power from 34 bhp to 55 bhp (25 to 41 kW). The car featured a racing-tuned engine, double SU carburettors, close-ratio gearbox and front disc brakes, uncommon at the time in a small car. One thousand units of this iteration were commissioned by management, intended for and designed to meet the homologation rules of Group 2 rally racing. The 997 cc engine was replaced by a shorter stroke 998 cc unit in 1964.

A more powerful Mini Cooper, dubbed the "S", was developed in tandem and released in 1963. Featuring a 1071 cc engine and larger servo-assisted disc brakes, 4,030 Cooper S cars were produced and sold until the model was updated in August 1964. Cooper also produced two models specifically for circuit racing, rated at 970 cc and a 1275 cc, both of which were also offered to the public. The smaller-engine model was not well received, and only 963 were built until the model was discontinued in 1965. The 1275 cc Cooper S models were discontinued in 1971.

The Mini Cooper S earned acclaim with Monte Carlo Rally victories in 1964, 1965, and 1967. Minis were initially placed first, second and third in the 1966 rally as well, but were disqualified after a controversial decision by the French judges. The disqualification related to the use of a variable resistance headlamp dimming circuit in place of a dual-filament lamp. It should be noted that the Citroën DS that was eventually awarded first place had illegal white headlamps but escaped disqualification. The driver of the Citroën, Pauli Toivonen, was reluctant to accept the trophy and vowed that he would never race for Citroën again. BMC probably received more publicity from the disqualification than they would have gained from a victory - but had the Mini not been disqualified, it would have been the only car in history to be placed amongst the Monte Carlo winners for six consecutive years.

In 1971 the Mini Cooper design was licensed in Italy by Innocenti and in 1973 to Spain by Authi (Automoviles de Turismo Hispano-Ingleses), which began to produce the Innocenti Mini Cooper 1300 and the Authi Mini Cooper 1300, respectively.

A new Mini Cooper named the RSP (Rover Special Products) was briefly relaunched in 1990 to 1991, with slightly lower performance than the 1960s Cooper. It proved so popular that the new Cooper-marked Mini went into full production in late 1991. From 1992 Coopers were fitted with a fuel-injected version of the 1275 cc engine, and in 1997 a multi-point fuel injected engine was introduced, along with a front-mounted radiator and various safety improvements.

Ferrari F40, 1987

2010-12-20T17:03:00.000-08:00

Ferrari F40, 1987

The Ferrari F40 is a mid-engine, rear-wheel drive, two-door coupé sports car produced by Ferrari from 1987 to 1992 as the successor to the Ferrari 288 GTO. From 1987 to 1989 it held the title as the world's fastest street-legal production car, and during its years of production, was Ferrari's fastest, most powerful, and most expensive car. It was intended that there were to be 400 Ferrari F40 made, all painted red, but a total 1,315 F40s were produced.

The Ferrari F40 was, in the most literal sense, designed as the successor to the company's GTO supercar, but the project's meaning ran deeper. At ninety years old, Enzo Ferrari was keenly aware that his life was coming to an end, and was somewhat disappointed that Ferrari's dominance in international motorsport had faded somewhat over the years. As a result, Enzo wanted a new pet project put into the pipelines, something that could remind the world of the company's capabilities as a manufacturer as well as provide both a competitor to the Porsche 959 and come to be his masterpiece; the company's impending 40th anniversary provided just the right occasion for the car to debut. The plan was simple: create a vehicle that combined the company's best technologies into a no-frills sports car that would come as close as possible to being a full fledged race vehicle while still retaining the necessary equipment to be a street-legal product. It was the last car to be commissioned by Enzo himself before his death.

The Ferrari F40 was designed with aerodynamics in mind, and is very much a creation of its time. For speed the car relied more on its shape than its power. Frontal area was reduced, and airflow greatly smoothed, but stability rather than terminal velocity was a primary concern. So too was cooling as the forced induction engine generated a great deal of heat. In consequence, the car was somewhat like an open-wheel racing car with a body. It had a partial undertray to smooth airflow beneath the radiator, front section, and the cabin, and a second one with diffusers behind the motor, but the engine bay was not sealed. Nonetheless, the Ferrari F40 had an impressively low Cd of 0.34 with lift controlled by its spoilers and wing.

Power came from an enlarged, 2.9 L (2936 cc) version of the GTO's twin IHI turbocharged V8 developing 478 PS (352 kW/471 hp) under 110 kPa (16 psi) of boost. The suspension setup, like the GTO's, remained a double wishbone setup, though many parts were upgraded and settings were changed; the unusually low ground clearance prompted Ferrari to include the ability to raise the vehicle's ground clearance when necessary.

The body was an entirely new design by Pininfarina featuring panels made of kevlar, carbon fiber, and aluminum for strength and low weight, and intense aerodynamic testing was employed. Weight was further minimized through the use of a plastic windshield and windows and no carpets, sound system, or door handles were installed although the cars did have air conditioning. Early cars had fixed windows, although newer windows that could be rolled down were installed into later cars and the Ferrari F40 did without a catalytic converter until 1990 when US regulations made them a requirement for emissions control reasons.

As early as 1984, the Maranello factory had begun development of an evolution model of the 288 GTO intended to compete against the 959 in FIA Group B. However, when the FIA brought an end to the Group B category for the 1986 season, Enzo was left with five 288 GTO Evoluzione development cars, and no series in which to campaign them. Enzo's desire to leave a legacy in his final supercar allowed the Evoluzione program to be further developed to produce a car exclusively for road use.

The factory never intended to race the Ferrari F40, but the car saw competition as early as 1989 when it debuted in the Laguna Seca round of the IMSA, appearing in the GTO category, with a LM evolution model driven by Jean Alesi, finishing third to the two faster spaceframed four wheel drive Audi 90 and beating a host of other factory backed spaceframe specials that dominated the races. Despite lack of factory backing, the car would soon have another successful season there under a host of guest drivers such as Jean-Pierre Jabouille, Jacques Laffite and Hurley Haywood taking a total of three second places and one third.

Though the Ferrari F40 would not return to IMSA for the following season, it would later be a popular choice by privateers to compete in numerous domestic GT series including JGTC. In 1994, the car made its debut in international competitions, with one cars campaigned in the BPR Global GT Series by Strandell, winning at the 4 Hours of Vallelunga. In 1995, the number of F40s climbed to four, developed independently by Pilot-Aldix Racing (F40 LM) and Strandell (F40 GTE, racing under the Ferrari Club Italia banner), winning the 4 Hours of Anderstorp. No longer competitive against the McLaren F1 GTR, the Ferrari F40 returned for another year in 1996, managing to repeat the previous year's Anderstorp win, and from then on it was no longer seen in GT racing.

Performance
The F40's light weight of 1100 kg (2425 lb) and high power output of 478 PS (352 kW/471 hp) at 7000 rpm gave the vehicle tremendous performance potential. Road tests have produced 0-100 km/h (62 mph) times as low as 3.8 seconds (while the track only version came in at 3.2 seconds), with 0-160 km/h (100 mph) in 7.6 seconds and 0-200 km/h (125 mph) in 11 seconds giving the Ferrari F40 a slight advantage in acceleration over the Porsche 959, its primary competitor at the time.

The Ferrari F40 was the first road legal production car to break the 200 mph (322 km/h) barrier. From its introduction in 1987 until 1989, it held the record as the world's fastest production car, with a top speed of 324 km/h (201 mph); the record was broken by the Ruf CTR "Yellowbird"'s 340 km/h (211 mph) top speed. The Ferrari F40 was publicly proven capable of its rated top speed in 1992 through an infamous incident in which a Japanese dealership owner proved the car's potential by filming himself touching its top speed on an expressway only to be arrested after he sold a videotape to an undercover policeman. By that time, he already sold ten thousand videos.

Bentley S1, 1955

2010-12-20T16:57:00.000-08:00

Bentley S1, 1955

The Bentley S1 was a luxury car produced by Bentley Motors Limited from 1955 through 1959. It marked Bentley parent, Rolls-Royce, reducing the differences between their Bentley and Roll-Royce models, with the S1 differing only in its radiator design and badging from the Rolls-Royce Silver Cloud I.

The models shared the 4.9 L (4887 cc/298 in³) straight-6 engine, with this being the last vehicle to use this engine. The bore was 95.25 mm (3.7 in) and the stroke was 114.3 mm (4.5 in). Twin SU carburetors were fitted, with upgraded models from 1957. A 4-speed automatic transmission was standard, with a 4-speed manual available as an option. Two wheelbases were produced: 123 in (3124 mm) and, from 1957, 127 in (3226 mm).

A somewhat sportier coachbuilt-only S1 Continental was introduced six months later.

Production
S1: 3072 (145 with coachbuilt bodies)
S1 long wheelbase: 35 (12 with coachbuilt bodies)
S1 Continental: 431

Bentley R-Type, 1950

2010-12-20T16:56:00.000-08:00

Bentley R-Type, 1950

The R Type was the second series of post-war Bentley automobile, replacing the Mark VI. The front of the saloon model was identical to the Mark VI, but many had custom coachwork.

The Continental model was produced specially for continental Europe, with many coachbuilt by H.J. Mulliner. This would be the first appearance of the famed Bentley Continental name.

All R Type models used an iron-block/aluminum-head straight-6 engine fed by twin SU carburettors. The basic engine displaced 4.6 L (4566 cc/278 in³) with a 92.08 mm (3.6 in) bore and 114.3 mm (4.5 in) stroke. The Continental had a larger bore of 94.62 mm (3.7 in) for a total displacement of 4.9 L (4887 cc/298 in³).

Production numbers
Bentley R Type: 2320 (303 with coachbuilt bodies)

Bentley R Continental: 207 (plus one prototype)

Bentley Embiricos, 1937

2010-12-20T16:53:00.000-08:00

Bentley Embiricos, 1937

Infiniti I35, 2009

2010-12-14T16:18:00.000-08:00

Infiniti I35, 2009

The I30 and I35 were front wheel drive luxury cars from Nissan's Infiniti marque.
The I30 was redesigned for 2000 along with the Maxima. E

In late 2001 the model got its most significant host of upgrades, including minor revisions to the interior, new optional equipment, larger brakes, a re-tuned suspension system, and standard stability control. The car was renamed I35 to reflect an engine-displacement increase from 3.0 to 3.5 L. Nissan's VQ35DE V6 produced 255 hp. Styling was also updated.

Infiniti wanted to convince buyers that the new suspension tuning, enlarged brakes, stability control and 255 horsepower engine had transformed the I into more of a sports sedan and less of sedate entry-level model, but was largely unsuccessful. The model was only available with a 4-speed automatic transmission and front wheel drive, meaning that the ES300 and the base version Acura's then-new TL remained its closest competitors, and models like the 5-Series remained out of its league, as was Acura's Type-S version of the TL.

In September 2004, Nissan announced that I35 production would cease and that model year 2004 would be the last for this vehicle. Infiniti discontinued the I after a short run of 2004 models. The I was succeeded by the new Infiniti G35 (introduced for 2003).

Infiniti G35 Sport Coupe, 2003

2010-12-14T16:11:00.000-08:00

Infiniti G35 Sport Coupe, 2003

The Infiniti G35 is a sport luxury car introduced to North America in the 2003 model year. It is known as the 11th generation (V35) Nissan Skyline in Japan, and other names elsewhere in the world. It is available in sedan and coupe. A 6-speed manual transmission became available in 2003 as a 2003.5 model on the sedan (the coupe always had the option). For the 2003-04 model years, the V6 produced 260 horsepower and 260 ft·lbf of torque in the sedan, 280 horsepower and 270 ft·lbf in the coupe. In the 2005 and 2006 model years, those with automatic transmissions (both sedan and coupe) produced 280 horsepower and 270 ft·lbf of torque, while those with manual transmissions produced 298 horsepower and 260 ft·lbf of torque (again, both in sedan and coupe form). The G35 is assembled in Tochigi, Japan, and the first G35 was built on March 12, 2002 as a 2003 model.

The G35 was Motor Trend's Car of the Year for 2003 and has been well-received by both the media and customers as a viable alternative to more expensive luxury cars. The G35 was also nominated for the North American Car of the Year award that year and was on Car and Driver magazine's Ten Best list for 2003 and 2004.

Sporting the ubiquitous (and esteemed) VQ35DE engine, the Infiniti G35 uses a front-midship engine, rear-wheel drive layout (all-wheel drive is available for the G35x sedan) to achieve a 52/48 weight distribution (52% front/48% rear) . Both body styles are available with either a 5-speed automatic or 6-speed manual transmission, although the automatic is the only transmission available for the AWD sedan. The all-wheel drive model is designated the G35x and uses an Aisin-Warner intelligent AWD system that shifts power to the wheels with the most grip.

There are not many differences between the 2003 & 2004 G35 coupes. Both 03 & 04 6MT come standard with Brembo Brakes and the Performance Tire and Wheel Package. For the 2005 models, there were sportier gauges and better interior trim and knobs. Genuine Aluminum trim replaces "tinted" interior trim. Also, rosewood trim is available as a package on the 2005 models. The Brembo Brakes were removed for the 05 & 06 models. Instead, Sport-Tuned Suspension Package was standard on all 6MT models. The 2006 models received minor updates. On the exterior there were new headlights, taillights, spoiler, and front bumper. Bluetooth capability was added to the interior, for hands-free phone use. Rear active steering was also an option for the '06 5AT.

Subaru R-2, 1969

2010-12-06T20:52:00.000-08:00

Subaru R-2, 1969

Renault 4 CV Sport, 1954

2010-12-06T20:47:00.000-08:00

Renault 4 CV Sport, 1954

The Renault 4CV was an automobile produced by the French manufacturer Renault from 1946 to 1961. An economical "people's car" inspired by the Volkswagen Beetle, it was the first French car to sell over a million.

The 4CV was originally conceived and designed covertly by Renault engineers during the German occupation of France during World War II, when the manufacturer was under strict orders to design and produce only commercial and military vehicles. A design team led by Fernand Picard, Charles-Edmond Serre and Jean-Auguste Riolfo envisioned a small, economical car (similar to the Volkswagen Beetle) suitable for the economically difficult years which would inevitably follow the war. The first prototype was completed in 1942 and two more prototypes were produced in the following three years, with the 4CV ultimately presented to the public and media at the 1946 Paris Motor Show.

On the 4CV's launch, it was nicknamed "La motte de beurre" (the lump of butter) due to the combination of its shape and the fact that many early models were painted with sand yellow-colored German army surplus paint intended for the Afrika Korps. The 4CV was powered by a 748 cc engine producing 17 hp, which was coupled to a three-speed manual transmission. Despite an initial period of uncertainty and poor sales due to the ravaged state of the French economy, the 4CV had sold 37,000 units by mid-1949 and was the most popular car in France. The car remained in production for more than a decade afterwards; it was intended to be replaced by the Renault Dauphine, launched in 1956, but the 4CV in fact remained in production until 1961, only a year earlier than the more expensive Dauphine was discontinued. In event, it was replaced by the Renault 4 which used the same engine and name as the 4CV and sold for a similar price.

1,105,547 cars were produced; the 4CV became the first French car to sell over a million.

The 4CV was easily modified and was used extensively as a racing car, winning both the Le Mans 24 Hours and the Mille Miglia. The first collaboration between the Alpine company and Renault, a partnership which would go on to win the World Rally Championship with the legendary Alpine A-110 in later years, was the Alpine A-106 which was based on the 4CV.

Renault Fregate, 1951

2010-12-06T20:42:00.000-08:00

Renault Fregate, 1951

The Renault Frégate was a large car produced by the French automaker Renault between 1951 and 1960.

The Frégate was conceived in the years immediately following World War II. Renault, which then had recently been brought under control of the French state, needed a new modern, upmarket model to both improve its image and to cater to the needs of consumers in the quickly recovering economy. Several prototypes were produced before the Frégate design was put into production: initially, the car had a rear-engined layout as in the recently launched Renault 4CV but eventually the manufacturer decided to go with an engine mounted ahead of the driver. The Frégate was unveiled at the 1950 Paris Motor Show but the first model was not delivered until November 1951.

The Frégate was initially available in two trim levels, Affaires and Amiral. Renault addressed the complaints about the lack of power from the 2 litre engine by introducing the new 2141 cc Etendard engine in 1956, which produced 77 hp. A popular estate model badged Domaine was also launched in 1956, along with the new, luxurious Grand Pavois specification. Sales of the Frégate gradually declined throughout the 1950s however and production ceased in 1960. In total, 163,383 Frégates were made in Flins, France.

VW Passat, 1973

2010-11-29T06:46:00.000-08:00

VW Passat, 1973

The original VW Passat was launched in 1973. The body types offered originally were 2- and 4-door sedans and similar looking three- and five-door versions. Externally all four shared a modern fastback style design, styled by the Italian designer Giorgetto Giugiaro). All the versions sharing the same external design was unusual, since two of the models were traditional sedans with a separate trunk. A five-door station wagon was introduced in 1974. Passat was effectively a less expensive version of the Audi 80 (Fox) sedan which had been introduced a year earlier and which had a more conservative body style, so that the Audi and Volkswagen models had distinct body styles and image. In Europe, Passat was equipped with hexagonal or single round or double round headlights depending on specification.

In North America, the car was called the Dasher, and was only available with round DOT-spec lights. The three-door hatchback model was launched in North America in 1975.

VW Passat was one of the most modern European family cars at the time, and was intended as a replacement for the ageing Volkswagen Type 3, and as a contemporary rival for popular Ford Taunus/Cortina) and Opel Ascona/Vauxhall Cavalier. The Passat was Wheels magazine's Car of the Year for 1974 and its sister model Audi 80 was nominated car of the year by the European motor press a year earlier. The platform was named B1.

The Passat used the 4 cylinder OHC 1.3 L, 1.5 L, and 1.6 L petrol engines, also used in the Audi 80—longitudinally mounted with front wheel drive, in Audi tradition, with either a 4-speed manual transmission or 3-speed automatic. It had a MacPherson strut front suspension with a solid axle/coil spring setup in back.

The SOHC 1.5 produced 75 PS (55 kW) and was enlarged to 1.6 L for 1975. The larger engine included tighter emissions controls, so power output dropped to 70 PS (52 kW). Bosch fuel injection on the 1.6 was introduced in 1976 and brought power up to 78 PS (57 kW).

The whole range received a facelift in 1977 (launched 1978 outside Europe), featuring an interior upgrade and subtly revised styling including repositioned indicators and quad (round) headlights on all models. This generation was sold in Brazil well into the 1980s and extensively exported to Iraq, where many are still on the road. It was also assembled in Nigeria.

1979 saw the introduction of the Volkswagen Golf's 1.5 L Diesel engine, which produced just 48 PS (35 kW) in the 1130 kg (2500 lb) car. 0–100 km/h time for the Diesel was 19.4 seconds, 6.2 seconds slower than the gasoline (petrol) engine. Still, all gasoline engines were dropped for North America in 1981 in preparation for the next generation car the next year.

Mercury Cougar Zn, 2001

2010-11-29T06:33:00.000-08:00

Mercury Cougar Zn, 2001

The decline of personal luxury cars downsized the Cougar to return as a sports car after 25 years as a personal luxury car. Of the three names that had constituted Ford's personal luxury lineup, Mark, Thunderbird, and Cougar, the Cougar returned first. This time, it is based on the CDW-27 platform, the same platform that serves as the basis for the Ford Mondeo (Ford Contour & Mercury Mystique in the United States and Canada).

This generation of Cougar had a far more contemporary package, with modern DOHC 4-valve engines, a fully independent multilink suspension, and front-wheel drive. This was also the first hatchback Cougar, and the first to have its own body, unshared by any Ford. The body design used a philosophy Ford dubbed "New Edge" design: a combination of organic upper body lines with sharp, concave creases in the lower areas. The Cougar's body, and the New Edge idea in general, was introduced as a concept called the Mercury MC2 in 1997.

The 1999–2002 Cougars were available with two engine options, the 2.0 L Zetec 4-cylinder engine with 130 horsepower, and the 2.5 L Duratec V6 with 170 horsepower. Also, two transaxle options were available: the manual Ford MTX-75 transmission (the only available option with the 4-cylinder Zetec engine), or the automatic Ford CD4E transmission (available in the U.S. with either engine, although the I4/Automatic combo was extremely rare; supposedly only 500 Cougars were built with the I4/Auto combination). "Sport Package" models with the V6 featured 4-wheel vented disc brakes (from the Contour SVT), and had no speed governor installed.

Interestingly, Ford also sold this generation of Cougar in Europe and Australia as the Ford Cougar, but was not a sales success—surprising given that the Mondeo sold well in many countries outside North America.

This generation never sold well. Admittedly, demand for all coupes continued to dwindle, but the sedan versions also languished in North America, suggesting that the Mondeo platform was simply not well suited there—though there is a theory that Ford did not market the Contour and its Mercury Mystique twin properly while the market for the similarly sized BMW 3 Series grew. A high-performance Cougar S (not to be confused with the concept) was discussed in the press, which was essentially a Contour SVT with a Cougar body; however, this version never made it into production. In order to help create excitement for the Cougar, Mercury created several paint and trim packages:
    * C2 (2001-2002 model years) available in either French Blue, Silver Frost, or Vibrant White, along with special blue interior accents
    * Zn (2000-2001 model years) available with special Zinc Yellow paint, special Visteon hood scoop and spoiler
    * XR (2002 model year) available in either Black or Laser Red, with special black and red seats and interior trim

Mercury Cougar C2, 2001

2010-11-29T06:19:00.000-08:00

Mercury Cougar C2, 2001

The decline of personal luxury cars downsized the Cougar to return as a sports car after 25 years as a personal luxury car. Of the three names that had constituted Ford's personal luxury lineup, Mark, Thunderbird, and Cougar, the Cougar returned first. This time, it is based on the CDW-27 platform, the same platform that serves as the basis for the Ford Mondeo (Ford Contour & Mercury Mystique in the United States and Canada).

This generation of Cougar had a far more contemporary package, with modern DOHC 4-valve engines, a fully independent multilink suspension, and front-wheel drive. This was also the first hatchback Cougar, and the first to have its own body, unshared by any Ford. The body design used a philosophy Ford dubbed "New Edge" design: a combination of organic upper body lines with sharp, concave creases in the lower areas. The Cougar's body, and the New Edge idea in general, was introduced as a concept called the Mercury MC2 in 1997.

The 1999–2002 Cougars were available with two engine options, the 2.0 L Zetec 4-cylinder engine with 130 horsepower, and the 2.5 L Duratec V6 with 170 horsepower. Also, two transaxle options were available: the manual Ford MTX-75 transmission (the only available option with the 4-cylinder Zetec engine), or the automatic Ford CD4E transmission (available in the U.S. with either engine, although the I4/Automatic combo was extremely rare; supposedly only 500 Cougars were built with the I4/Auto combination). "Sport Package" models with the V6 featured 4-wheel vented disc brakes (from the Contour SVT), and had no speed governor installed.

Ford also prepared two high performance concept-only versions dubbed the "Eliminator", which was a supercharged version built with aftermarket available parts, and the "Cougar S", which featured new body work, all-wheel drive and a 3.0 L Duratec engine.

Interestingly, Ford also sold this generation of Cougar in Europe and Australia as the Ford Cougar, but was not a sales success—surprising given that the Mondeo sold well in many countries outside North America.

This generation never sold well. Admittedly, demand for all coupes continued to dwindle, but the sedan versions also languished in North America, suggesting that the Mondeo platform was simply not well suited there—though there is a theory that Ford did not market the Contour and its Mercury Mystique twin properly while the market for the similarly sized BMW 3 Series grew. A high-performance Cougar S (not to be confused with the concept) was discussed in the press, which was essentially a Contour SVT with a Cougar body; however, this version never made it into production. In order to help create excitement for the Cougar, Mercury created several paint and trim packages:

C2 (2001-2002 model years) available in either French Blue, Silver Frost, or Vibrant White, along with special blue interior accents
Zn (2000-2001 model years) available with special Zinc Yellow paint, special Visteon hood scoop and spoiler
XR (2002 model year) available in either Black or Laser Red, with special black and red seats and interior trim

For the 2001 model year, the Cougar was "updated" with new headlights, front and rear facsias, and updated interior trim.

Dodge 2 dr. Sedan (hotrod), 1933

2010-11-23T01:46:00.000-08:00

Dodge 2 door sedan (hotrod), 1933

1933 Dodge 2 door sedan, hotrod. Engine 350

Datsun 240z, 1972

2010-11-23T01:42:00.000-08:00

Datsun 240z, 1972

Porsche 901, 1963

2010-11-16T02:35:00.000-08:00

Porsche 901, 1963

Porsche 901 was the name originally intended for the Porsche 911. By the early 1960s, Porsche project design numbers had reached into the 800s. For instance, Porsche's 1962 F1 model was called Porsche 804.

At the Internationale Automobil-Ausstellung (Frankfurt Motor Show) in Frankfurt in September 1963, Porsche presented its successor to the Porsche 356 as the Porsche 901. It took several more months until the cars was sold to customers. In late 1964, after having sold about 82 cars, the Porsche 901 was presented at the Paris Auto Salon. There, French car maker Peugeot objected to Porsche using any three digit number where the middle number was 0, owning the naming rights and having already sold many models with that scheme.

Porsche simply replaced the middle 0 with a 1, and called the car Porsche 911.

Other Porsche models were affected, which were primarily intended for racing but also sold as road legal cars. Here, Porsche kept the internal part number of 90x, but sold the car with a name, like: Porsche 904 as Carrera GTS, Porsche 906 as Carrera 6.

Porsche enthusiasts continue to refer to these cars by their three digit design numbers.

Later, Porsche introduced pure racing cars which were not sold for road use, so not competing with any road-going Peugeot. These carried the design numbers: Porsche 907, Porsche 908, Porsche 909.

Nearly three decades later, a 905 was entered in the 1991 24 Hours of Le Mans, but not by Porsche (which then had won over a dozen times already), but by Peugeot: The Peugeot 905 won twice, in 1992 and in 1993. A Peugeot 908 Diesel was entered in the 2008 event, and won in 2009. Peugeot never used the number 901, though.

The 901 number is used among Porsche enthusiasts as shorthand to identify the aluminum 5-Speed transmission used in early 911s, the part number for these transmissions used an 11 digit code that began with 901 as did many other parts on the early cars. Later 911s from 1969 used a different magnesium case and a part number beginning with 911.

Pontiac GTO, 1967

2010-11-16T02:30:00.000-08:00

Pontiac GTO, 1967

The Pontiac GTO was an automobile built by Pontiac from 1964 to 1974, and by General Motors Holden in Australia from 2003 to 2006. It is often considered the first true muscle car. From 1964 until 1973.5, it was closely related to the Pontiac Tempest, but for its final year it was based on the Pontiac Ventura. The 21st century GTO is essentially a left hand drive Holden Monaro, itself a coupe variant of the Holden Commodore.

Origins
The GTO was the brainchild of Pontiac engineer Russell Gee, an engine specialist, and Pontiac chief engineer John De Lorean. Shane Wiser was the first to think of the idea of the GTO. In early 1963, General Motors management issued an edict banning divisions from involvement in auto racing. At the time, Pontiac's advertising and marketing approach was heavily based on performance, and racing was an important component of that strategy. Jim Wangers proposed a way to retain the performance image that the division had cultivated with a new focus on street performance. It involved transforming the upcoming redesigned Tempest (which was set to revert to a conventional front-engine, front transmission, rear-wheel drive configuration) into a "Super Tempest" with the larger 389 in³ (6.5 L) Pontiac V8 engine from the full-sized Pontiac Catalina and Bonneville in place of the standard 326 in³ (5.3 L) Tempest V8. By promoting the big-engine Tempest as a special high-performance model, they could appeal to the speed-minded youth market (which had also been recognized by Ford Motor Company's Lee Iacocca, who was at that time preparing the Ford Mustang).

The name, which was DeLorean's idea, was inspired by the Ferrari 250 GTO, the highly successful race car. It is an acronym for Gran Turismo Omologato, Italian for homologated for racing in the GT class. The name drew protest from purists, who considered it close to sacrilege.

The GTO was technically a violation of GM policy limiting the A-body intermediate line to a maximum engine displacement of 330 in³ (5.4 L). Since the GTO was an option package and not standard equipment, it could be considered to fall into a loophole in the policy. Pontiac General Manager Elliot "Pete" Estes approved the new model, although sales manager Frank Bridge, who did not believe it would find a market, insisted on limiting initial production to no more than 5,000 cars. Had the model been a failure, Estes likely would have been reprimanded. As it turned out, it was a great success.

First generation

1964
The first Pontiac GTO was an option package for the Pontiac LeMans, available with the two-door sedan, hardtop coupe, and convertible body styles. For US$ 296, it included the 389 in³ V8 (rated at 325 hp (242 kW) at 4800 rpm) with a single Carter AFB four-barrel carburetor and dual exhaust, chromed valve covers and air cleaner, 7 blade clutch fan, a floor-shifted three-speed manual transmission with Hurst shifter, stiffer springs, larger diameter front sway bar, wider wheels with 7.50 x 14 redline tires, hood scoops, and GTO badges. Optional equipment included a four-speed manual transmission, two-speed automatic transmission, a more powerful "Tri-Power" carburation rated at 348 hp (260 kW), metallic drum brake linings, limited slip differential, heavy-duty cooling, ride and handling package, and the usual array of power and convenience accessories. With every available option, the GTO cost about US$ 4,500 and weighed around 3,500 pounds (1,600 kg).

Most contemporary road tests used the more powerful Tri-Power engine and four-speed. Car Life clocked a GTO so equipped at 0-60 miles per hour (0-97 km/h) in 6.6 seconds, through the standing quarter mile in 14.8 seconds with a top speed of 99 miles per hour (158 km/h). Like most testers, they criticized the slow steering, particularly without power steering, and inadequate drum brakes, which were identical to those of the normal Tempest. Car and Driver incited controversy when it printed that a GTO that had supposedly been tuned with the "Bobcat" kit offered by Royal Pontiac of Royal Oak, Michigan, was clocked at a quarter mile time of 12.8 seconds and a top speed of 112 mph (179 km/h) on racing slicks. Later reports strongly suggest that the Car and Driver GTOs were equipped with a 421 in³ (6.9 L) engine that was optional in full-sized Pontiacs. Since the two engines were difficult to distinguish externally, the subterfuge was not immediately obvious. Frank Bridge's sales forecast proved inaccurate: the GTO package had sold 10,000 units before the beginning of the 1964 calendar year, and total sales were 32,450.

Bobcat
Throughout the 1960s, Royal Pontiac, a Pontiac car dealer in Royal Oak, Michigan, offered a special tune-up package for Pontiac 389 engines. Many were fitted to GTOs, and the components and instructions could be purchased by mail as well as installed by the dealer. The name "Bobcat" came from the improvised badges created for the modified cars, combining letters from the "Bonneville" and "Catalina" nameplates. Many of the Pontiacs made available for magazine testing were equipped with the Bobcat kit. The GTO Bobcat accelerated 0-60 in 4.6 seconds (this 0-60 time is now equalled by the factory 2005-06 GTO with automatic transmission and no modification).

The precise components of the kit varied but generally included pieces to modify the spark advance of the distributor, limiting spark advance to 34-36° at no more than 3,000 rpm (advancing the timing at high rpm for increased power), a thinner head gasket to raise compression to about 11.23:1, a gasket to block the heat riser of the carburetor (keeping it cooler), larger carburetor jets, high-capacity oil pump, and fiberglass shims with lock nuts to hold the hydraulic valve lifters at their maximum point of adjustment, allowing the engine to rev higher without "floating" the valves. Properly installed, the kit could add between 30 and 50 horsepower (20-40 kW), although it required high-octane superpremium gasoline of over 100 octane to avoid spark knock with the higher compression and advanced timing.

1965
The Tempest line, including the GTO, was restyled for the 1965 model year, adding 3.1 inches (7.9 cm) to the overall length while retaining the same wheelbase and interior dimensions. It sported Pontiac's characteristic vertically stacked quad headlights. Overall weight increased about 100 pounds (45 kg). Brake lining area increased nearly 15%. The dashboard design was improved, and an optional rally gauge cluster added a more legible tachometer and oil pressure gauge.

The 389 engine had revised cylinder heads with re-cored intake passages, improving breathing. Rated power increased to 335 hp (250 kW) @ 5,000 rpm for the base 4—barrel engine; the Tri-Power was rated 360 hp ((268 kW) @ 5,200 rpm. The Tri-Power engine had slightly less torque than the base engine, 424 ft·lbf (574 N·m) @ 3,600 rpm versus 431 ft·lbf (584 N·m) @ 3,200 rpm. Transmission and axle ratio choices remained the same.

The restyled GTO had a new simulated hood scoop. A rare, dealer-installed option was a metal underhood pan and gaskets that allowed the scoop to be opened, transforming a cosmetic device into a functional cold air intake. The scoop was low enough that its effectiveness was questionable (it was unlikely to pick up anything but boundary layer air), but it at least admitted cooler, denser air, and allowed more of the engine's formidable roar to escape.

Car Life tested a 1965 GTO with Tri-Power and what they considered the most desirable options (close-ratio four-speed manual transmission, power steering, metallic brakes, rally wheels, 4.11 limited-slip differential, and Rally Gauge Cluster), with a total sticker price of US$3,643.79. With two testers and equipment aboard, they recorded 0-60 miles per hour (0-97 km/h) in 5.8 seconds, the standing quarter mile in 14.5 seconds with a trap speed of 100 miles per hour (160 km/h), and an observed top speed of 114 miles per hour (182.4 km/h) at the engine's 6,000 rpm redline. Even Motor Trend's four-barrel test car, a heavier convertible handicapped by the two-speed automatic transmission and the lack of a limited slip differential, ran 0-60 mph in 7 seconds and through the quarter mile in 16.1 seconds at 89 miles per hour (142.4 km/h).

Pontiac's intermediate line was restyled again for 1966,
gaining more curvaceous styling with kicked-up rear fender lines for a "Coke-bottle" look, and a slightly "tunneled" backlight. Overall length grew only fractionally, to 206.4 inches (524 cm), still on a 115 inch (292 cm) wheelbase, while width expanded to 74.4 inches (189 cm). Rear track increased one inch (2.5 cm). Overall weight remained about the same. The GTO became a separate model series, rather than an option package, with unique grille and tail lights, available as a pillared sports coupe, a hardtop sans pillars, or a convertible. Also an automotive industry first, plastic front grilles replaced the pot metal and aluminum versions seen on earlier years. New Strato bucket seats were introduced with higher and thinner seat backs and contoured cushions for added comfort and adjustable headrests were introduced as a new option. The instrument panel was redesigned and more integrated than in previous years with the ignition switch moved from the far left of the dash to the right of the steering wheel. Four pod instruments continued, and the GTO's dash was highlighted by walnut veneer trim. The 1966 model year is viewed by many as the most iconic of all GTOs because of its independent model status and because it was the last year Pontiac offered the 389 Tri Power engine configuration.

Engine choices remained the same as the previous year. A new rare engine option was offered: the XS engine option consisted of a factory Ram Air set up with a new 744 high lift cam. Approximately 35 factory installed Ram Air packages are believed to have been built, though 300 dealership installed Ram Air packages are estimated to have been ordered. On paper, the package was said to produce the same 360 hp as the non-Ram Air, Tri Power car, though these figures are believed to have been grossly underestimated in order to get past GM mandates.

Sales increased to 96,946, the highest production figure for all GTO years. Although Pontiac had strenuously promoted the GTO in advertising as the "GTO Tiger," it had become known in the youth market as the "Goat." Pontiac management attempted to make use of the new nickname in advertising but were vetoed by upper management, which was dismayed by its irreverent tone.

1967
Styling remained essentially unchanged for 1967, but the GTO saw several significant mechanical changes.

A corporate policy decision banned multiple carburetors for all cars except the Chevrolet Corvette, so the Tri-Power engine was cancelled and replaced with new quadrajet four-barrel carburetor. Chevrolet was able to keep the tri-power set up to help with their image; the GTO was really becoming a serious competition problem for them. To compensate, the 389 engine received a slightly wider cylinder bore (4.12 inches, 104.7 mm) for a total displacement of 400 in³ (6.6 L). Torque increased slightly, from 431 to 441 ft-lbf (584 to 598 N·m) for the base engine, from 424 to 438 ft-lbf (575 to 594 N·m) for the optional engine but power remained the same. Testers found little performance difference, although the distinctive sound and fury of the Tri-Power was missed.

Two new engines were offered. The first was an economy engine, also 400 in³ but with a two-barrel carburetor, 8.6:1 compression, and a rating of 265 hp (198 kW) and 397 ft-lbf (538 N·m) of torque. The package, which included a functional hood scoop (much like the previous dealer-installed set-up), featured stiffer valve springs and a longer-duration camshaft. Rated power and torque were unchanged, although the engine was certainly stronger than that of the standard 360 hp (268 kW) GTO. It was available only with 3.90:1 or 4.33:1 differential gearing, and its "hotter" camshaft left it with a notably lumpier idle and less cooperative part-throttle response.

Emission controls, including an air injector system, were fitted in GTOs sold in California only.

The two-speed automatic was replaced with the three-speed Turbo-Hydramatic TH400, which was available with any engine. When the Strato bucket seats and console were ordered, the TH was further enhanced by the use of Hurst's Dual-Gate shifter, which permitted automatic shifting in "Drive' or manual selection through the gears. It was generally considered an equal match for the four-speed in most performance aspects. Meanwhile, the Tempest's inadequate drum brakes could be replaced by optional disc brakes on the front wheels (for US$104.79, including power boost), a vast improvement in both braking performance and fade resistance.

Infiniti G35, 2003

2010-11-16T02:19:00.000-08:00

Infiniti G35, 2003

The Infiniti G35 is a sport luxury car introduced to North America in the 2003 model year. It is known as the 11th generation (V35) Nissan Skyline in Japan, and other names elsewhere in the world. It is available in sedan and coupe. A 6-speed manual transmission became available in 2003 as a 2003.5 model on the sedan (the coupe always had the option). For the 2003-04 model years, the V6 produced 260 horsepower and 260 ft·lbf of torque in the sedan, 280 horsepower and 270 ft·lbf in the coupe. In the 2005 and 2006 model years, those with automatic transmissions (both sedan and coupe) produced 280 horsepower and 270 ft·lbf of torque, while those with manual transmissions produced 298 horsepower and 260 ft·lbf of torque (again, both in sedan and coupe form). The G35 is assembled in Tochigi, Japan, and the first G35 was built on March 12, 2002 as a 2003 model.

Sporting the ubiquitous (and esteemed) VQ35DE engine, the Infiniti G35 uses a front-midship engine, rear-wheel drive layout (all-wheel drive is available for the G35x sedan) to achieve a 52/48 weight distribution (52% front/48% rear) . Both body styles are available with either a 5-speed automatic or 6-speed manual transmission, although the automatic is the only transmission available for the AWD sedan. The all-wheel drive model is designated the G35x and uses an Aisin-Warner intelligent AWD system that shifts power to the wheels with the most grip.

The differences between the 2003 & 2004 G35 coupes. Both 03 & 04 6MT come standard with Brembo Brakes and the Performance Tire and Wheel Package. On the 2005 coupes, there were three new colors, 'Athens Blue', 'Lakeshore Slate' and 'Serengeti Sand', replacing 'Twilight Blue', Caribbean Blue, and 'Desert Platinum'. Also, Willow Cloth was removed and Stone interior was available. For the 2005 models, there were sportier gauges and better interior trim and knobs.

Oldsmobile Cutlass S, 1976

2010-11-09T16:35:00.000-08:00

Oldsmobile Cutlass S, 1976

The Oldsmobile Cutlass was an automobile made by the Oldsmobile division of General Motors. The Cutlass was introduced in 1961 as a unibody compact car competing with the Dodge Lancer and Mercury Comet.

Over the years, the Cutlass name was used by Oldsmobile as almost a sub-marque, with a number of different vehicles bearing the name simultaneously. This was probably shrewd, because the Cutlass name had great equity and became one of the most popular nameplates in the industry in the 1970s. However, the proliferation of Oldsmobile Cutlass models caused confusion in the market-place in the 1980s, when three different vehicles (the Cutlass Calais, Cutlass Ciera, and Cutlass Supreme) all shared the name.

Fourth Generation
The F-85/Cutlass was redesigned for 1973 using GM's new "Colonnade" A platform. The model lineup consisted of the Cutlass "S", Cutlass Supreme, Cutlass Salon, Vista Cruiser station wagon, and the 442 appearance package on the Cutlass "S" colonnade coupe.

The Cutlass Salon was added in 1973 as an upscale model, first as a 4-door, then 1974 brought the 2-door Salon. Also, this was the first Oldsmobile with the 'international' flags emblem which was later carried into the Cutlass Ciera.

For 1975, Cutlass featured the Oldsmobile 260 V8 with a 5-speed manual transmission (T-50 - optioned in 1976 and 1977) or optional automatic transmission (TH-200 or TH-350).

Optional engines were the Olds 350 or Olds 455, but only with automatic transmissions. The Buick 231 in³ V6 was added for 1977. The Olds 403 replaced the 455 that same year, and a restyle was done.
In 1976 the Oldsmobile Cutlass was America's best selling car.

Oldsmobile 442, 1971

2010-11-09T16:30:00.000-08:00

Oldsmobile 442, 1971

The Oldsmobile 442 was a muscle car produced by the Oldsmobile division of General Motors. It was introduced as an option package for F-85 and Cutlass models sold in the United States beginning with the 1964 model year. It became a model in its own right from 1968 to 1971, then reverted to an option through the mid-1970s. Oldsmobile revived the name in the 1980s on the rear-wheel drive Cutlass Supreme and early 1990s as an option package for the new front-wheel drive Cutlass.

1968
The 442 became a separate model from 1968 through 1971. The wheelbase was 112 in, and over 33,000 were sold for 1968. Despite the engine displacement staying at 400 in³, the stroke was increased and the bore decreased to increase torque and improve emissions. However, its long stroke affected performance and they were deemed not as fast as the '67s. The base motor was still rated at 350 hp, but only with the standard 3-speed and optional 4-speed; automatics were rated at 325 hp. W-30s were rated again at 360 hp. All standard 1968 442 engines are painted a bronze/copper color, as with the 1967's, topped with a fire red air cleaner. W-30 option cars were equipped with Ram Air intake hoses leading from a chrome topped dual snorkle black air cleaner to special under bumper air scoops and set off by bright red plastic fender wells. In addition, a Turnpike Cruiser option was made available with a 2bbl. carb; this was previously available on the Cutlass Supreme for 1967.

It was in 1968 that Oldsmobile first partnered with Hurst Performance Research Corporation to create the Hurst/Olds rather than just adding Hurst shifters as with earlier models. The limited regular production run of 515 Hurst/Olds (459 Holiday Coupes/56 Sport Coupes) started out as regular 442s, but were treated to numerous distinct enhancements both cosmetic and mechanical. All cars were painted Peruvian Silver (a Toronado color) with liberal black striping and white pinstipes, exterior and interior H/O badging (unique to '68), and a real walnut wood dash insert. Mechanically, the cars left the factory with 2 drivetrain combinations. Red 455 in³ engines were backed by modified W-30 Turbo 400 automatic transmissions. A/C cars got a W-46 engine with a 3.08:1 rear while non-A/C cars got a W-45 engine with a 3.91:1 rear. While both engines were rated at 390 hp, the W-45 engine received the cylinder heads from the W-30 and the camshaft from the W-31 making it more suitable for higher rpms. All cars came with bucket seats and a Hurst Dual-Gate shifter in a mini-console. Also standard were numerous regular 442 options like disc brakes, heavy duty cooling, and FE2 suspension. They shared the red fender wells and ram air setup with the W-30. Popular, but not standard, additional options included the tic-toc-tach and wood-grained steering wheel.

1969
1969 442s were very similar to the 1968. Changes to the engine and drivetrain were minimal, but the Turnpike Cruiser option was deleted. However, another hi-po engine was offered. Called the W-32, it came with the Forced Air Induction plumbing found on the W-30s, but it had a milder cam like the base engine. It was only available with an automatic, and 297 were built, including 25 sport coupes and convertibles each.

1970
1970 saw the introduction of the Olds 455 V8 as the standard 442 engine. Output was 365 hp and 500 ft·lbf, with a 370 hp W30 option available. The 365 and 370 hp (272 and 276 kW) power ratings were conservatively underrated at a lower rpm. Both engines are believed by some to produce 410 to 420 hp (306-313 kW). It was the pace car at the Indianapolis 500 race in 1970, along with the Cutlass Supreme.

In addition to the standard 442 offerings, W-30's received a W-25 fiberglass OAI (Outside Air Induction) hood to replace the bumper scoops that were on the 68 and 69 W-30's, an aluminum intake manifold, special camshaft, cylinder heads, distributor, and carburetor.
Engine output was down for 1971 due to a lower compression ratio, which affected all of GM's engines. The base 455 was rated at 340 hp, with the W-30 achieving a rating of 350 hp. The sport coupe disappeared for the first time since 1964, only to return the following year.

Ford Model A Station Wagon, 1929

2010-11-01T06:31:00.000-07:00

Ford Model A Station Wagon, 1929

Ford Model A Station Wagon. Only 5,000 were produced.

Citroen DS 21 Cabrio, 1970

2010-11-01T06:23:00.000-07:00

Citroen DS 21 Cabrio, 1970

normal riding height.
two slightly higher riding heights, for poor terrain.
two extreme positions for changing wheels.

The DS did not have a jack for lifting the car off the ground. Instead, the hydraulic system enabled wheel changes with the aid of a simple adjustable stand.

Source and reserve of pressure
The central part of the hydraulic system was the high pressure reservoir, which maintained a pressure of between 130 and 150 bar in two accumulators. These accumulators were very similar in construction to the suspension spheres. One was dedicated to the brakes, and the other ran the other hydraulic systems. Thus in case of a hydraulic failure (a surprisingly infrequent occurrence), the first indication would be that the steering became heavy, followed by the gearbox not working; only later would the brakes fail.

Hydraulic fluid
The original hydropneumatic system used a vegetable oil (LHV or liquide hydraulique végétale) similar to that used in other cars at the time. Very soon, Citroën changed to using a synthetic fluid (LHS or liquide hydraulique synthétique). Both of these had the disadvantage that they are hygroscopic, as is the case with most brake fluids. Disuse allows water to enter the hydraulic components causing deterioration and expensive maintenance work. The difficulty with hygroscopic hydraulic fluid was exacerbated in the DS/ID due to the extreme rise and fall in the fluid level in the reservoir, which went from nearly full to nearly empty when the suspension "got up" and the 6 accumulators in the system filled with fluid. With every "inhalation" of fresh moisture- (and dust-) laden air, the fluid absorbed more water. In August 1967, Citroën introduced a new mineral oil-based fluid LHM, or liquide hydraulique minérale. This fluid was much less aggressive on the system and it remains in use to the present day.

Gearbox and clutch
The mechanical aspects of the gearbox and clutch were completely conventional and the same elements were used in the ID 19.

The gear change control consisted of:
* Hydraulic gear selector.
* Clutch control. This was the most complicated part. The speed of engagement of the clutch was controlled by:
* A centrifugal regulator, sensing engine rpm and driven off the camshaft by a belt
* The position of the butterfly valve in the carburettor (i.e. the position of the accelerator)
* The brake circuit: when the brake was pressed, the engine idle speed dropped to a rpm below the clutch engagement speed, thus preventing friction while stopped in gear at traffic lights. When the brake was released, the idle speed increased to the clutch dragging speed. The car would then "creep" much like automatic transmission cars. This drop in idle throttle position also caused the car to have more engine drag when the brakes were applied even before the car slowed to the idle speed in gear, preventing the engine from "pulling" against the brakes.

DS in the US
While the DS was a hit in Europe, it seemed rather odd in the United States. Ostensibly a luxurious car, it did not have the basic features that buyers of that era expected to find on such a vehicle - fully automatic transmission, air conditioning, power windows and a reasonably powerful engine. The DS price point was similar to the contemporary Cadillac luxury car. Also, people at the time wanted only the newest models, which changed every year, like fashion, yet the DS appeared vaguely derivative of the 1950 Hudson Hornet step-down design.

Outdated US legislation also banned one of the car's more advanced features, aerodynamic headlamps, now common in US automobiles. Ultimately, 38,000 units were sold. The first year of the aerodynamic glass over the DS' headlights along with driving lights turned by the steering, was also the first year these features were outlawed in the US.

Design variations
The DS always maintained its size and shape, with easily removable, unstressed body panels, but certain design changes did occur.

A station wagon version was introduced in 1958. It was known by various names in different markets (Break in France, Safari and Familiale in the UK, Wagon in the US, and Citroën Australia used the terms Safari and Station-Wagon). It had a steel roof to support the standard roof rack.

In September 1962, the DS was restyled with a more aerodynamically efficient nose, better ventilation and other improvements. It retained the open two headlamp appearance, but was available with an optional set of driving lights mounted on the front fenders. In 1965 a luxury upgrade kit, the DS Pallas (after Greek goddess Pallas), was introduced. This included comfort features such as better noise insulation, leather upholstery and external trim embellishments.

In 1967, the DS and ID was again restyled. This version had a more streamlined headlamp design, giving the car a notably shark-like appearance. This design had four headlights under a smooth glass canopy, and the inner set swivelled with the steering wheel. This allowed the driver to see 'around' turns, especially valuable on twisting roads driven at high speed at night.

However, this feature was not allowed in the US at the time (see World Forum for Harmonization of Vehicle Regulations), so a version with four exposed headlights that did not swivel was made for the US market.

The station wagon edition, the Break (called the ID Safari on the UK market) and "Familiale", was also upgraded. The hydraulic fluid changed in all markets (except the US) to the technically superior LHM (Liquide Hydraulique Minérale).

Rarest and most collectible of all DS variants, a convertible was offered from 1958 until 1973. The convertibles were built in small series by French carrossier Henri Chapron, for the Citroën factory. In addition, Chapron also produced a few coupés, non-works convertibles and special sedans (DS Lorraine for instance).

Chrysler Cordoba, 1978

2010-11-01T06:16:00.000-07:00

Chrysler Cordoba, 1978

1978 Chrysler Cordoba

Porsche 550 Spyder, 1953

2010-10-25T20:42:00.000-07:00

Porsche 550 Spyder, 1953

The Porsche 550 was a sports car produced by Porsche from 1953-1956. Inspired by the Porsche 356 which was created by Ferry Porsche, and some spyder prototypes built and raced by Walter Glöckler starting in 1951, the factory decided to build a car designed for use in auto racing. The model Porsche 550 Spyder was introduced at the 1953 Paris Auto Show. The Porsche 550 was very low to the ground, in order to be efficient for racing. In fact, former German Formula One racer Hans Herrmann drove it under closed railroad crossing gates during the 1954 Mille Miglia.

The Porsche 550 / 1500RS or Spyder became known as the "Giant Killer". The later 1956 evolution version of the model, the 550A, which had a lighter and more rigid spaceframe chassis, gave Porsche its first overall win in a major sports car racing event, the 1956 Targa Florio.

Its successor from 1957 onwards, the Porsche 718, was even more successful, scoring points in Formula One as late as 1963. A descendant of the Porsche 550 is generally considered to be the Porsche Boxster S 550 Spyder; the Spyder name was effectively resurrected with the RS Spyder Le Mans Prototype.

The Porsche 550 "Little Bastard", serial number 550-0055 is best known for being the car in which James Dean was killed on September 30, 1955.

Citroen DS 19 Cabrio, 1964

2010-10-25T20:35:00.000-07:00

Citroen DS 19 Cabrio, 1964

The Citroën DS (also known as Déesse, or Goddess, after the punning initials in French) was an automobile produced by the French manufacturer Citroën between 1955 and 1975. Citroën sold nearly 1.5 million D-series during its 20 years of production.The DS is well-known for its futuristic, aerodynamic body design, and for its innovative technology (including its hydropneumatic self-leveling suspension system).

The DS advanced the achievable standards in terms of ride quality, roadholding, handling, and braking in an automobile. Automotive journalists of the time often noted that competitors took decades to adapt to the higher standards it set. The smooth, aerodynamic body lines gave the car a futuristic appearance. While it looked very unusual in 1955, public tastes appear to have caught up with the DS in the post-Ford Taurus/Audi 100 era.

Model history
After 18 years of development in secret as the successor to the venerable Traction Avant, the DS 19 was introduced on October 5, 1955 at the Paris Motor Show. The car's appearance and innovative engineering captured the imagination of the public and the automobile industry almost overnight. 743 orders were taken in the first 15 minutes of the show, and orders for the first day totalled 12,000.

Far from being just a fascinating technology in search of a purpose, contemporary journalists were effusive in noting how the DS dramatically pushed the envelope in the ride vs. handling compromise possible in a motor vehicle.

The high price tag, however, hurt general sales in a country still recovering from World War II 10 years earlier, and a submodel, the ID (another pun: in French, Idée, or Idea), was introduced in 1957 to appeal to more cost-conscious buyers. The ID shared the same body with the DS, but had more traditional features under the hood. It had no power steering (though this was added as an option later), and instead of the hydraulically controlled manual transmission and clutch, it had a conventional clutch and transmission. Interestingly, the first model series was called 11D, a clear reminder of the last model of the Traction Avant, the 11C. A station wagon variant, the ID Break, was introduced in 1958.

Outside of France, the car's radical and cosmopolitan design appealed to non-conformists. A United States advertisement summarised this selling point: "It takes a special person to drive a special car".

Throughout its model lifetime, the DS managed to remain ahead of its time. It featured power disc brakes, a hydropneumatic suspension including an automatic levelling system and variable ground clearance, power steering and a semi-automatic transmission. A fiberglass roof reduced weight transfer. Inboard front brakes (as well as an independent suspension) reduced unsprung weight. Different front and rear track widths and tire sizes reduced the understeer typical of front-engined and front-wheel drive cars.

Despite the rather leisurely acceleration afforded by its small four-cylinder engine, the DS was successful in motorsports like rallying, where sustained speeds on poor surfaces are paramount.

The DS came in third in the 1999 Car of the Century competition, recognizing the the world's most influential auto designs. Winner and second place went to the Ford Model T and the Mini. It placed fifth on Automobile Magazine "100 Coolest Cars" listing in 2005.
History will remember the DS for many reasons, including the fact it was the first production car with front disc brakes.

Technical innovations

Hydraulic system
The hydraulic system of the DS 19 was a revolution. Previously hydraulics had been restricted to use in brakes and power steering; the DS used them for the suspension, clutch and transmission. The later ID19 had manual steering and a simplified power braking system.

Suspension
At a time when few passenger vehicles had caught up with the four-wheel independent suspension of the Traction Avant, the application of the hydraulic system to the car's suspension system to provide true self-levelling was a stunning move. This application - 'hydropneumatic suspension' - was pioneered the year before on the rear of the top of range Traction Avant 15CV-H.
At first it was often described as air/oil suspension, since both elements played a key role.

Each wheel was connected not to a spring, but to a hydraulic suspension unit consisting of:
* a sphere of about 12 cm in diameter containing pressurised nitrogen
* a cylinder containing hydraulic fluid screwed to the suspension sphere
* a piston inside the cylinder connected by levers to the suspension itself
* a damper valve between the piston and the sphere

A membrane in the sphere prevented the nitrogen from escaping. The motion of the wheels translated to a motion of the piston, which acted on the oil in the nitrogen cushion and provided the spring effect. The damper valve took place of the shock absorber in conventional suspensions.

The hydraulic cylinder was fed with hydraulic fluid from the main pressure reservoir via a height corrector, a valve controlled by the mid-position of the anti-roll bar connected to the axle. If the suspension was too low, the height corrector introduced high-pressure fluid. If it was too high, it released fluid back to the fluid reservoir. In this manner, it maintained a constant height. A control in the cabin allowed the driver to select one of five heights:
* normal riding height.
* two slightly higher riding heights, for poor terrain.
* two extreme positions for changing wheels.

The DS did not have a jack for lifting the car off the ground. Instead, the hydraulic system enabled wheel changes with the aid of a simple adjustable stand.

Source and reserve of pressure
The central part of the hydraulic system was the high pressure reservoir, which maintained a pressure of between 130 and 150 bar in two accumulators. These accumulators were very similar in construction to the suspension spheres. One was dedicated to the brakes, and the other ran the other hydraulic systems. Thus in case of a hydraulic failure (a surprisingly infrequent occurrence), the first indication would be that the steering became heavy, followed by the gearbox not working; only later would the brakes fail.

Hydraulic fluid
The original hydropneumatic system used a vegetable oil (LHV or liquide hydraulique végétale) similar to that used in other cars at the time. Very soon, Citroën changed to using a synthetic fluid (LHS or liquide hydraulique synthétique). Both of these had the disadvantage that they are hygroscopic, as is the case with most brake fluids. Disuse allows water to enter the hydraulic components causing deterioration and expensive maintenance work. The difficulty with hygroscopic hydraulic fluid was exacerbated in the DS/ID due to the extreme rise and fall in the fluid level in the reservoir, which went from nearly full to nearly empty when the suspension "got up" and the 6 accumulators in the system filled with fluid. With every "inhalation" of fresh moisture- (and dust-) laden air, the fluid absorbed more water. In August 1967, Citroën introduced a new mineral oil-based fluid LHM, or liquide hydraulique minérale. This fluid was much less aggressive on the system and it remains in use to the present day.

Briefly illegal in the United States (US federal law requires motor vehicle brake fluid to be red - an exception had to be granted to Citroën), LHM has since been adopted by manufacturers like Rolls-Royce, Jaguar, BMW, and Audi under different labels, like "Total," "Pentosin," and others.

LHM required completely different materials for the seals. Using either fluid in the incorrect system would completely destroy the hydraulic seals very quickly. To help avoid this problem, Citroën added a bright green dye to the LHM fluid and also painted all hydraulic elements bright green. The former LHS parts were painted black.

Several different hydraulic pumps were used. The DS used a seven-cylinder axial piston pump driven off two belts and delivering 175 bar of pressure. The ID19, with its simpler hydraulic system, had a single cylinder pump.

Gearbox and clutch
The mechanical aspects of the gearbox and clutch were completely conventional and the same elements were used in the ID 19.

The gear change control consisted of:
* Hydraulic gear selector.
* Clutch control. This was the most complicated part. The speed of engagement of the clutch was controlled by:
* A centrifugal regulator, sensing engine rpm and driven off the camshaft by a belt
* The position of the butterfly valve in the carburettor (i.e. the position of the accelerator)
* The brake circuit: when the brake was pressed, the engine idle speed dropped to a rpm below the clutch engagement speed, thus preventing friction while stopped in gear at traffic lights. When the brake was released, the idle speed increased to the clutch dragging speed. The car would then "creep" much like automatic transmission cars. This drop in idle throttle position also caused the car to have more engine drag when the brakes were applied even before the car slowed to the idle speed in gear, preventing the engine from "pulling" against the brakes.

Impact on Citroën brand development
The 1955 DS in one stroke cemented the Citroën brand name as an automotive innovator. In fact, the DS caused such a huge sensation that Citroën was fearful future models would not be bold enough. Other than variations on the very basic 2 cylinder economy car Citroën 2CV, like the Citroën Ami, no new models were introduced from 1955 to 1970.

The DS was a large, expensive executive car and a downward brand extension was attempted, but without result. Throughout the late 1950s and 1960s Citroën developed many new vehicles for the very large market segments between the 2CV and the DS, occupied by vehicles like the Peugeot 403, Renault 16 and Ford Cortina. None made it to production. Either they had uneconomic build costs, or were ordinary "me too" cars, not up to the company's high standard of innovation. Because Citroën was owned by Michelin as a sort of research laboratory, such experimentation was possible. Citroën finally did introduce the clever Citroën GS in 1970, which sold a spectacular 2.5 million units.

DS in the US
While the DS was a hit in Europe, it seemed rather odd in the United States. Ostensibly a luxurious car, it did not have the basic features that buyers of that era expected to find on such a vehicle - fully automatic transmission, air conditioning, power windows and a reasonably powerful engine. The DS price point was similar to the contemporary Cadillac luxury car. Also, people at the time wanted only the newest models, which changed every year, like fashion, yet the DS appeared vaguely derivative of the 1950 Hudson Hornet step-down design.

Outdated US legislation also banned one of the car's more advanced features, aerodynamic headlamps, now common in US automobiles. Ultimately, 38,000 units were sold. The first year of the aerodynamic glass over the DS' headlights along with driving lights turned by the steering, was also the first year these features were outlawed in the US.

Design variations
The DS always maintained its size and shape, with easily removable, unstressed body panels, but certain design changes did occur.

A station wagon version was introduced in 1958. It was known by various names in different markets (Break in France, Safari and Familiale in the UK, Wagon in the US, and Citroën Australia used the terms Safari and Station-Wagon). It had a steel roof to support the standard roof rack.

In September 1962, the DS was restyled with a more aerodynamically efficient nose, better ventilation and other improvements. It retained the open two headlamp appearance, but was available with an optional set of driving lights mounted on the front fenders. In 1965 a luxury upgrade kit, the DS Pallas (after Greek goddess Pallas), was introduced. This included comfort features such as better noise insulation, leather upholstery and external trim embellishments.

In 1967, the DS and ID was again restyled. This version had a more streamlined headlamp design, giving the car a notably shark-like appearance. This design had four headlights under a smooth glass canopy, and the inner set swivelled with the steering wheel. This allowed the driver to see 'around' turns, especially valuable on twisting roads driven at high speed at night.

The feature was not allowed in the US at the time (see World Forum for Harmonization of Vehicle Regulations), so a version with four exposed headlights that did not swivel was made for the US market.

The station wagon edition, the Break (called the ID Safari on the UK market) and "Familiale", was also upgraded. The hydraulic fluid changed in all markets (except the US) to the technically superior LHM (Liquide Hydraulique Minérale).

Rarest and most collectible of all DS variants, a convertible was offered from 1958 until 1973. The convertibles were built in small series by French carrossier Henri Chapron, for the Citroën factory. In addition, Chapron also produced a few coupés, non-works convertibles and special sedans (DS Lorraine for instance).

DS engines
As with all French cars, the DS design was impacted by the tax horsepower system, which effectively mandated very small engines.

Unlike the Traction Avant predecessor, there was no top-of-range model with a powerful six cylinder engine. The DS was designed around an air cooled flat six based on the design of the 2 cylinder engine of the 2CV, similar to the motor in the Porsche 911. Technical issues forced this idea to be scrapped.

Thus, for such a modern car, the engine of the original DS 19 was also old-fashioned. It was derived from the engine of the 11CV Traction Avant (models 11B and 11C). It was an OHV four-cylinder engine with three main bearings and dry liners, and a bore of 78 mm and a stroke of 100 mm, giving a volumetric displacement of 1911 cc. The cylinder head had been reworked; the 11C had a reverse-flow cast iron cylinder head and generated 60 hp at 3800 rpm; by contrast, the DS 19 had an aluminium cross-flow head with hemispherical combustion chambers and generated 75 hp at 4500 rpm. Apart from these details, there was very little difference between the engines: even the locations of the cylinder head studs were the same, so that it was possible to put the cylinder head of a DS on a Traction Avant engine and run it.

Like the Traction Avant, the DS had the gearbox mounted in front of the engine, with the differential in between. Thus the DS is a really a mid engine front wheel drive car. It initially had a four-speed transmission and clutch, operated by a hydraulic controller. To change gears, the driver flicked a lever behind the steering wheel to the next position and eased-up on the accelerator pedal. The hydraulic controller disengaged the clutch, engaged the nominated gear, and re-engaged the clutch. Manual transmission control was a lower-cost option. The later and simpler ID19 also had the same gearbox and clutch, manually operated. In the 1970s a five-speed manual and 3-speed fully-automatic were introduced, in addition to the original four-speed unit.

The DS and ID powerplants evolved throughout its 20 year production life. The car was underpowered and faced constant mechanical changes to boost the performance of the four-cylinder engine. The initial 1911 cc 3 main bearing engine (carried forward from the Traction Avant) of the DS 19 was replaced in 1965 with the 1985 cc 5 bearing motor of the DS 19a (called DS20 from September 1969).

The DS 21 was also introduced for model year 1965. This was a 2175 cc, 5 main bearing engine. This engine received a substantial increase in power with the introduction of Bosch electronic fuel injection for 1970, making the DS one of the first mass-market cars to use electronic fuel injection.

Lastly, 1973 saw the introduction of the 2347 cc engine of the DS 23 in both carbureted and fuel injected forms. The DS 23 with electronic fuel injection was the most powerful production model, producing 141 horsepower.

IDs and their variants went through a similar evolution, generally lagging the DS by about one year. ID models never received the DS 23 engine or fuel injection. The DS was offered with a number of transmission options, including the "Hydraulique" 4-speed semi-automatic, 4-speed and 5-speed manuals and a 3-speed Borg-Warner full-automatic. The full-automatic transmissions were intended for the US market, but as Citroën withdrew from the US in 1972, the year of highest US sales, due to constrictive road rules, most automatic DSs, being the DS 23 EFI sedans with air conditioning, were sold in Australia.

Citroen 2CV Berline, 1963

2010-10-25T20:26:00.000-07:00

Citroen 2CV Berline, 1963

The Citroën 2CV (French: deux chevaux, literally "two horses", from the tax horsepower rating) was an economy car produced by the French automaker Citroën from 1948 to 1990.

The 2CV belongs to a very short list of vehicles introduced right after World War II that remained relevant and competitive for many decades - in the case of the 2CV, 42 years.

Pierre-Jules Boulanger's early 1930s design brief - said by some to be astonishingly radical for the time - was for a low-priced, rugged "umbrella on four wheels" that would enable two peasants to drive 100 kg of farm goods to market at 60 km/h, in clogs and across muddy unpaved roads if necessary. France at that time had a very large rural population, who had not yet adopted the automobile due to cost. The car would use no more than 3 litres of gasoline to travel 100 km. Most famously, it would be able to drive across a ploughed field without breaking the eggs it was carrying. Boulanger later also had the roof raised to allow him to drive while wearing a hat.

André Lefèbvre was the engineer in charge of the TPV (Très Petite Voiture - "Very Small Car") project. By 1939, the TPV was deemed ready and several prototypes had been built. Those prototypes made use of aluminium or magnesium parts and had water-cooled engines. The seats were hammocks suspended from the roof by wires.

During the German occupation of France during World War II, Michelin (Citroën's main shareholder) and Citroën managers decided to hide the TPV project from the Nazis, fearing some military application. Several TPVs were buried at secret locations, one was disguised as a pickup, and the others were destroyed, and Boulanger had the next six years to think about more improvements. Until 1994, when three TPVs were discovered in a barn, it was believed that only two prototypes had survived. As of 2003, five TPVs are known. For long it was believed that the project was so well hidden that the all the prototypes were lost at the end of the war (in fact it seems that none of the hidden TPVs was lost after the War, but in the 1950s an internal memo ordered them to be scrapped. The surviving TPVs were, in fact, hidden from the top management by some workers who were sensitive to their historical value).

After the war, internal reports at Citroën showed that producing the TPV would not be economically viable, given the rising cost of aluminium in the post-war economy. A decision was made to replace most of the aluminium parts with steel parts. Other changes were made, the most notable being an air-cooled engine, new seats and a restyling of the body by Flaminio Bertoni. It took three years for Citroën to rework the TPV and the car was nicknamed "Toujours Pas Vue" (Still Not Seen) by the press.

Citroën finally unveiled the car at the Paris Salon in 1948. The car on display was nearly identical to the type A version that would be sold next year, but lacked an electric starter: the addition of this one was decided the day before the opening of the Salon of Paris. It was enormously criticized. In spite of that, it had a great impact on low-income population.

It was laughed at by journalists, probably because Citroën had launched the car without any press advertising. Boris Vian described the car as an "aberration roulante" (rolling aberration) and the car was qualified as a "Spartan car" or a "sardine can" by many. History has confirmed that the car was charming in a lot of people's views, and a revolution in consumer transportation, at least on the French market.

The 2CV was a great commercial success: within months of it going on sale, there was a three-year waiting list. The waiting list was soon increased to five years. At that time a second-hand 2CV was more expensive than a new one because the buyer did not have to wait. Production was increased from four units per day in 1949 to 400 units per day in 1950. Some of the early models were built at Citroën's plant in Slough, England but the 2CV sold poorly in Great Britain in part due to its excessive cost. Expecting to boost sales, Citroën introduced a glass-fibre coupé version called the Bijou that was briefly produced at Slough. Styling of this little car was by Peter Kirwan-Taylor who was better known for his work with Colin Chapman of Lotus cars, but it proved to be too heavy for the diminutive engine to endow it with adequate performance.

In 1967 Citroën built a new car based on the 2CV, the Citroën Dyane, in response to the direct competition by the Renault 4. At the same time, Citroën developed the Méhari off-roader.

A rare Jeep-esque derivative, called the Yagán, after an Aborigine tribe, was made in Chile between 1972 and 1973. After the Chilean coup of 1973, there were 200 Yagáns left that were used by the Army to patrol the streets and the Peruvian border, with 106 mm cannons.

The purchase price of the 2CV was always very low. In Germany in the 1960s for example, it cost about half as much as a Volkswagen Beetle.

As time went on, this rural horse-substitute gained favor with a new audience: European nonconformists who protested mass consumer culture. At the time, a popular joke was that 2CVs came straight from the factory with Atomic Power - No Thanks! bumperstickers. Owning a 2CV was like being in a club - 2CV owners would wave to each other on the road.

The 2CV was mainly sold in France and some European markets. In the post war years, Citroën was very focused on the home market, which had some unusual quirks, like puissance fiscale. The management of Michelin was indulgent of Citroën up to a point, but was not prepared to initiate the investment needed for the 2CV (or the Citroën DS for that matter) to truly compete on the global stage. Consequently, the 2CV suffered a similar fate to the Morris Minor and Mini, selling fewer than 10 million units, whereas the Volkswagen Beetle, which was sold worldwide, sold 21 million units.

In Iran, the Citroën 2CV was called the Jian. The cars were originally manufactured in Iran in a joint venture between Citroën and Iran National up until the 1979 Revolution, when Iran National was nationalized, which continued producing the Jian without the involvement of Citroën.
Only a few thousand 2CVs were sold in North America when they were new - the car was so small and inexpensive that the cost of transport alone put it into a different and uneconomic price category. The 2CV was built in Chile and Argentina to address this issue for South America.

Construction
The level of technology in the 1948 2CV was remarkable for a car of any price in that era, let alone one of the cheapest cars on the planet. While colors and detail specifications were modified in the ensuing 42 years, the biggest mechanical change was the addition of front disc brakes in 1981 for the 1982 model year.

The 1948 2CV featured:
* four wheel independent suspension that was inter-connected front to rear on the same side under certain conditions
* leading arm front suspension
* trailing arm rear suspension
* rear fender skirts
* front-wheel drive
* inboard front brakes
* small, lightweight, air-cooled flat twin engine
* 4-speed manual transmission
* bolt-on detachable body panels
* front suicide doors
* detachable full length fabric sunroof and boot lid — for load carrying versatility

The body was constructed of a dual H-frame chassis, an airplane-style tube framework, and a very thin steel shell.

The suspension of the 2CV was almost comically soft — a person could easily rock the car back and forth dramatically. The leading arm / trailing arm swinging arm, fore-aft linked suspension system together with inboard front brakes had a much smaller unsprung weight than existing coil spring or leaf designs. The interconnection transmitted some of the force deflecting a front wheel up over a bump, to push the rear wheel down on the same side. When the rear wheel met that bump a moment later, it did the same in reverse, keeping the car level front to rear. This made the suspension more responsive, enabling the 2CV to indeed be driven at speed over a ploughed field. Since the rear brakes were outboard, extra shock absorbers or tuned mass dampers were fitted to the rear wheels to damp wheel bounce.

Front-wheel drive made the car easy and safe to drive and Citroën had developed some experience with it due to the pioneering Traction Avant.

It was powered by a flat-twin air-cooled engine designed by Walter Becchia, with a nod to the classic 'boxer' BMW motorcycle engine (it is reported that Becchia dismantled the engine of the BMW motorcycle of Flaminio Bertoni before designing the 2CV engine).

The car had a 4-speed manual transmission, an advanced feature on an inexpensive car at the time. Boulanger had originally insisted on no more than 3 gears, because he believed that with four ratios the car would be perceived as complex to drive by customers. Thus, the fourth gear was marketed as an overdrive, this is why on the early cars the "4" was replaced by "S" for surmultipliée. The gear shifter came horizontally out of the dashboard with the handle curved upwards. It had a strange shift pattern. The first was back on the left, the second and third were inline and the fourth (or the S) could be engaged only by turning the lever to the right from the third.

In keeping with the ultra-utilitarian (and rural) design brief, the canvas roof could be rolled completely open. The windscreen wipers were powered by a purely mechanical system: a cable connected to the transmission, to reduce cost, this cable powered also the speedometer. The wipers' speed was therefore variable with car speed. When the car was waiting at a crossroad, the wipers were not powered, thus it was also possible to power them by hand.

The reliability of the car was increased by the fact that, being air-cooled, it had no coolant, radiator, water pump or thermostat. It had no distributor either because both spark plugs were fired at the same time, on every two strokes. Except for the brakes there were no hydraulic parts on original models as the shock absorbers were based on an inertial system.

Engines
The car featured an air-cooled, flat-twin, four-stroke, 375 cc engine, with the notoriously underpowered earliest model developing only 9 bhp DIN (6.5 kW). A 425 cc engine was introduced in 1955, followed by a 602 cc (giving 28 bhp (20.5 kW) at 7000 rpm) in 1968. With the 602 cc engine the tax classification of the car changed so that it became in fact a 3CV, but the commercial name remained unchanged. A 435 cc engine was introduced at the same time in replacement of the 425 cc, the 435 cc engine car was christened 2CV 4 while the 602 cc took the name 2CV 6 (nevertheless it did take the name 3CV in Argentina). The 602 cc engine evolved to 33 bhp (24 kW) in 1970; this was the most powerful engine fitted to the 2CV. A new 602 cc giving only 29 bhp (21.5 kW) at a slower 5750 rpm was introduced in 1979. Despite being less powerful, this engine was more efficient, allowing lower fuel consumption and better top speed, at the price of decreased acceleration.

The 2cv also pioneered the use of the now common Wasted spark Ignition System, also known as the DIS (Distributorless Ignition System) ignition using a double ended coil fired on each revolution, (on the exhaust and compression stroke), by just a contact breaker.

The last evolution of the 2CV engine was the Citroën Visa flat-2, a 652 cc featuring an electronic ignition. Citroën never sold this engine in the 2CV, however some enthusiasts have converted their 2CVs to 652 engines.

The end of the 2CV
The 2CV was produced for 42 years, the model finally succumbing to customer demands for speed and safety, areas in which this ancient design had fallen significantly behind modern cars.

Citroën had attempted to replace the ultra-utilitarian 2CV several times (with the Dyane, Visa, and the AX), however its comically antiquated appearance became an advantage to the car and it became a niche product which sold because it was different from anything else on sale.

While not a replacement for the 2CV, a straightforward, unremarkable urban runabout supermini like the Citroën AX seemed to address the automaker's requirements at the entry level in the 1990s.

In 1988, production ceased in France but was continued in Portugal. The last 2CV, gray with chassis number VF7AZKA00LA376002, rolled off the Portuguese production line on July 27, 1990. In all, a total of 3,872,583 2CV sedans were produced. Including the commercial versions of the 2CV, Dyane, Méhari, FAF, & Ami variants, the 2CV's underpinnings spawned over nine million cars.

The 2CV was outlived by contemporaries such as the Mini (went out of production in 2000), VW Beetle (2003), Renault 4 (1994), VW Type 2 (still in production) and Hindustan Ambassador (still in production).

Citroen DS 19, 1960

2010-10-25T20:13:00.000-07:00

Citroen DS 19, 1960

The DS advanced the achievable standards in terms of ride quality, roadholding, handling, and braking in an automobile. Automotive journalists of the time often noted that competitors took decades to adapt to the higher standards it set. The smooth, aerodynamic body lines gave the car a futuristic appearance. While it looked very unusual in 1955, public tastes appear to have caught up with the DS in the post-Ford Taurus/Audi 100 era.

Model history
After 18 years of development in secret as the successor to the venerable Traction Avant, the DS 19 was introduced on October 5, 1955 at the Paris Motor Show. The car's appearance and innovative engineering captured the imagination of the public and the automobile industry almost overnight. 743 orders were taken in the first 15 minutes of the show, and orders for the first day totalled 12,000.

Far from being just a fascinating technology in search of a purpose, contemporary journalists were effusive in noting how the DS dramatically pushed the envelope in the ride vs. handling compromise possible in a motor vehicle.

The high price tag, however, hurt general sales in a country still recovering from World War II 10 years earlier, and a submodel, the ID (another pun: in French, Idée, or Idea), was introduced in 1957 to appeal to more cost-conscious buyers. The ID shared the same body with the DS, but had more traditional features under the hood. It had no power steering (though this was added as an option later), and instead of the hydraulically controlled manual transmission and clutch, it had a conventional clutch and transmission. Interestingly, the first model series was called 11D, a clear reminder of the last model of the Traction Avant, the 11C. A station wagon variant, the ID Break, was introduced in 1958.

Throughout its model lifetime, the DS managed to remain ahead of its time. It featured power disc brakes, a hydropneumatic suspension including an automatic levelling system and variable ground clearance, power steering and a semi-automatic transmission. A fiberglass roof reduced weight transfer. Inboard front brakes (as well as an independent suspension) reduced unsprung weight. Different front and rear track widths and tire sizes reduced the understeer typical of front-engined and front-wheel drive cars.

Despite the rather leisurely acceleration afforded by its small four-cylinder engine, the DS was successful in motorsports like rallying, where sustained speeds on poor surfaces are paramount.
The DS came in third in the 1999 Car of the Century competition, recognizing the the world's most influential auto designs. Winner and second place went to the Ford Model T and the Mini. It placed fifth on Automobile Magazine "100 Coolest Cars" listing in 2005.

Technical innovations
Hydraulic system
The hydraulic system of the DS 19 was a revolution. Previously hydraulics had been restricted to use in brakes and power steering; the DS used them for the suspension, clutch and transmission. The later ID19 had manual steering and a simplified power braking system.

Suspension
At a time when few passenger vehicles had caught up with the four-wheel independent suspension of the Traction Avant, the application of the hydraulic system to the car's suspension system to provide true self-levelling was a stunning move. This application - 'hydropneumatic suspension' - was pioneered the year before on the rear of the top of range Traction Avant 15CV-H.

At first it was often described as air/oil suspension, since both elements played a key role.

Each wheel was connected not to a spring, but to a hydraulic suspension unit consisting of:
* a sphere of about 12 cm in diameter containing pressurised nitrogen
* a cylinder containing hydraulic fluid screwed to the suspension sphere
* a piston inside the cylinder connected by levers to the suspension itself
* a damper valve between the piston and the sphere

A membrane in the sphere prevented the nitrogen from escaping. The motion of the wheels translated to a motion of the piston, which acted on the oil in the nitrogen cushion and provided the spring effect. The damper valve took place of the shock absorber in conventional suspensions.

The hydraulic cylinder was fed with hydraulic fluid from the main pressure reservoir via a height corrector, a valve controlled by the mid-position of the anti-roll bar connected to the axle. If the suspension was too low, the height corrector introduced high-pressure fluid. If it was too high, it released fluid back to the fluid reservoir. In this manner, it maintained a constant height.

A control in the cabin allowed the driver to select one of five heights:
* normal riding height.
* two slightly higher riding heights, for poor terrain.
* two extreme positions for changing wheels.

The DS did not have a jack for lifting the car off the ground. Instead, the hydraulic system enabled wheel changes with the aid of a simple adjustable stand.

Source and reserve of pressure
The central part of the hydraulic system was the high pressure reservoir, which maintained a pressure of between 130 and 150 bar in two accumulators. These accumulators were very similar in construction to the suspension spheres. One was dedicated to the brakes, and the other ran the other hydraulic systems. Thus in case of a hydraulic failure (a surprisingly infrequent occurrence), the first indication would be that the steering became heavy, followed by the gearbox not working; only later would the brakes fail.

Hydraulic fluid
The original hydropneumatic system used a vegetable oil (LHV or liquide hydraulique végétale) similar to that used in other cars at the time. Very soon, Citroën changed to using a synthetic fluid (LHS or liquide hydraulique synthétique). Both of these had the disadvantage that they are hygroscopic, as is the case with most brake fluids. Disuse allows water to enter the hydraulic components causing deterioration and expensive maintenance work. The difficulty with hygroscopic hydraulic fluid was exacerbated in the DS/ID due to the extreme rise and fall in the fluid level in the reservoir, which went from nearly full to nearly empty when the suspension "got up" and the 6 accumulators in the system filled with fluid. With every "inhalation" of fresh moisture- (and dust-) laden air, the fluid absorbed more water. In August 1967, Citroën introduced a new mineral oil-based fluid LHM, or liquide hydraulique minérale. This fluid was much less aggressive on the system and it remains in use to the present day.

Briefly illegal in the United States (US federal law requires motor vehicle brake fluid to be red - an exception had to be granted to Citroën), LHM has since been adopted by manufacturers like Rolls-Royce, Jaguar, BMW, and Audi under different labels, like "Total," "Pentosin," and others.

LHM required completely different materials for the seals. Using either fluid in the incorrect system would completely destroy the hydraulic seals very quickly. To help avoid this problem, Citroën added a bright green dye to the LHM fluid and also painted all hydraulic elements bright green. The former LHS parts were painted black.
Several different hydraulic pumps were used. The DS used a seven-cylinder axial piston pump driven off two belts and delivering 175 bar of pressure. The ID19, with its simpler hydraulic system, had a single cylinder pump.

Gearbox and clutch
The mechanical aspects of the gearbox and clutch were completely conventional and the same elements were used in the ID 19.

The gear change control consisted of:
* Hydraulic gear selector.
* Clutch control. This was the most complicated part. The speed of engagement of the clutch was controlled by:
* A centrifugal regulator, sensing engine rpm and driven off the camshaft by a belt
* The position of the butterfly valve in the carburettor (i.e. the position of the accelerator)
* The brake circuit: when the brake was pressed, the engine idle speed dropped to a rpm below the clutch engagement speed, thus preventing friction while stopped in gear at traffic lights. When the brake was released, the idle speed increased to the clutch dragging speed. The car would then "creep" much like automatic transmission cars. This drop in idle throttle position also caused the car to have more engine drag when the brakes were applied even before the car slowed to the idle speed in gear, preventing the engine from "pulling" against the brakes.

Impact on Citroën brand development
The 1955 DS in one stroke cemented the Citroën brand name as an automotive innovator. In fact, the DS caused such a huge sensation that Citroën was fearful future models would not be bold enough. Other than variations on the very basic 2 cylinder economy car Citroën 2CV, like the Citroën Ami, no new models were introduced from 1955 to 1970.

The DS was a large, expensive executive car and a downward brand extension was attempted, but without result. Throughout the late 1950s and 1960s Citroën developed many new vehicles for the very large market segments between the 2CV and the DS, occupied by vehicles like the Peugeot 403, Renault 16 and Ford Cortina. None made it to production. Either they had uneconomic build costs, or were ordinary "me too" cars, not up to the company's high standard of innovation. Because Citroën was owned by Michelin as a sort of research laboratory, such experimentation was possible. Citroën finally did introduce the clever Citroën GS in 1970, which sold a spectacular 2.5 million units.

DS in the US
While the DS was a hit in Europe, it seemed rather odd in the United States. Ostensibly a luxurious car, it did not have the basic features that buyers of that era expected to find on such a vehicle - fully automatic transmission, air conditioning, power windows and a reasonably powerful engine. The DS price point was similar to the contemporary Cadillac luxury car. Also, people at the time wanted only the newest models, which changed every year, like fashion, yet the DS appeared vaguely derivative of the 1950 Hudson Hornet step-down design.

Outdated US legislation also banned one of the car's more advanced features, aerodynamic headlamps, now common in US automobiles. Ultimately, 38,000 units were sold. The first year of the aerodynamic glass over the DS' headlights along with driving lights turned by the steering, was also the first year these features were outlawed in the US.

Design variations
The DS always maintained its size and shape, with easily removable, unstressed body panels, but certain design changes did occur.

A station wagon version was introduced in 1958. It was known by various names in different markets (Break in France, Safari and Familiale in the UK, Wagon in the US, and Citroën Australia used the terms Safari and Station-Wagon). It had a steel roof to support the standard roof rack.

In September 1962, the DS was restyled with a more aerodynamically efficient nose, better ventilation and other improvements. It retained the open two headlamp appearance, but was available with an optional set of driving lights mounted on the front fenders. In 1965 a luxury upgrade kit, the DS Pallas (after Greek goddess Pallas), was introduced. This included comfort features such as better noise insulation, leather upholstery and external trim embellishments.

In 1967, the DS and ID was again restyled. This version had a more streamlined headlamp design, giving the car a notably shark-like appearance. This design had four headlights under a smooth glass canopy, and the inner set swivelled with the steering wheel. This allowed the driver to see 'around' turns, especially valuable on twisting roads driven at high speed at night.

However, this feature was not allowed in the US at the time (see World Forum for Harmonization of Vehicle Regulations), so a version with four exposed headlights that did not swivel was made for the US market.

Rarest and most collectible of all DS variants, a convertible was offered from 1958 until 1973. The convertibles were built in small series by French carrossier Henri Chapron, for the Citroën factory. In addition, Chapron also produced a few coupés, non-works convertibles and special sedans (DS Lorraine for instance).

DS engines
As with all French cars, the DS design was impacted by the tax horsepower system, which effectively mandated very small engines.

Unlike the Traction Avant predecessor, there was no top-of-range model with a powerful six cylinder engine. The DS was designed around an air cooled flat six based on the design of the 2 cylinder engine of the 2CV, similar to the motor in the Porsche 911. Technical issues forced this idea to be scrapped.

For such a modern car, the engine of the original DS 19 was also old-fashioned. It was derived from the engine of the 11CV Traction Avant (models 11B and 11C). It was an OHV four-cylinder engine with three main bearings and dry liners, and a bore of 78 mm and a stroke of 100 mm, giving a volumetric displacement of 1911 cc. The cylinder head had been reworked; the 11C had a reverse-flow cast iron cylinder head and generated 60 hp at 3800 rpm; by contrast, the DS 19 had an aluminium cross-flow head with hemispherical combustion chambers and generated 75 hp at 4500 rpm. Apart from these details, there was very little difference between the engines: even the locations of the cylinder head studs were the same, so that it was possible to put the cylinder head of a DS on a Traction Avant engine and run it.

Like the Traction Avant, the DS had the gearbox mounted in front of the engine, with the differential in between. Thus the DS is a really a mid engine front wheel drive car. It initially had a four-speed transmission and clutch, operated by a hydraulic controller. To change gears, the driver flicked a lever behind the steering wheel to the next position and eased-up on the accelerator pedal. The hydraulic controller disengaged the clutch, engaged the nominated gear, and re-engaged the clutch. Manual transmission control was a lower-cost option. The later and simpler ID19 also had the same gearbox and clutch, manually operated. In the 1970s a five-speed manual and 3-speed fully-automatic were introduced, in addition to the original four-speed unit.

The DS and ID powerplants evolved throughout its 20 year production life. The car was underpowered and faced constant mechanical changes to boost the performance of the four-cylinder engine. The initial 1911 cc 3 main bearing engine (carried forward from the Traction Avant) of the DS 19 was replaced in 1965 with the 1985 cc 5 bearing motor of the DS 19a (called DS20 from September 1969).

The DS 21 was also introduced for model year 1965. This was a 2175 cc, 5 main bearing engine. This engine received a substantial increase in power with the introduction of Bosch electronic fuel injection for 1970, making the DS one of the first mass-market cars to use electronic fuel injection.

Lastly, 1973 saw the introduction of the 2347 cc engine of the DS 23 in both carbureted and fuel injected forms. The DS 23 with electronic fuel injection was the most powerful production model, producing 141 horsepower.

IDs and their variants went through a similar evolution, generally lagging the DS by about one year. ID models never received the DS 23 engine or fuel injection. The DS was offered with a number of transmission options, including the "Hydraulique" 4-speed semi-automatic, 4-speed and 5-speed manuals and a 3-speed Borg-Warner full-automatic. The full-automatic transmissions were intended for the US market, but as Citroën withdrew from the US in 1972, the year of highest US sales, due to constrictive road rules, most automatic DSs, being the DS 23 EFI sedans with air conditioning, were sold in Australia.

Chrysler Cordoba, 1978

2010-10-25T20:03:00.000-07:00

Chrysler Cordoba, 1978

Lincoln MK9 Concept, 2001

2010-10-21T23:51:00.000-07:00

Lincoln MK9 Concept, 2001

The Lincoln MK9 was a Lincoln concept car first showcased in 2004. The vehicle hinted at a future comeback of a Lincoln Personal luxury car. The MK9 was a follow-on vehicle from the 2003 Lincoln Navicross concept, with similar styling cues.

The MK9 kicked off Lincoln's new naming convention of using letter and number combinations while hinting at a continuation of the Lincoln Mark series. While the naming system is similar to that of Mercedes-Benz or BMW, it does not contain any references regrading the vehicle's engine size or generation.

The Concept car features Lincoln's hallmark waterfall grille with the Lincoln diamond at its center. Two chrome accents on top of the vehicle's left and right shoulder run the entire length of the car. Chrome accented air vents are located near the doors on the front fenders.

The interior is flushed with lacquered wood and leather. Dark Cherry wood is used for the floor, while white leather is used for the headliner. The seats are models after the "Eames Lounge Chair" from the 1950's and are trimmed in red leather.

Jaguar XJ220, 1992

2010-10-21T23:46:00.000-07:00

Jaguar XJ220, 1992

Infiniti FX45, 2003

2010-10-21T23:27:00.000-07:00

Infiniti FX45, 2003

The Infiniti FX is a mid-size luxury crossover SUV. It is sold in two models: the FX35 and the FX45. Both were launched in 2003, the same time Lexus launched their GX 470. It replaced the QX4 as Infiniti's mid-size luxury SUV, despite being larger than its predecessor.

With the FX45 crossover, Infiniti sought to combine sports-car performance with SUV functionality. The FX45's 4.5 L V8 generates 315 hp (235 kW) and is coupled to a five-speed automatic transmission that incorporates a manual-shift mode. ATTESA E-TS All wheel drive is standard, and the FX45 has a sport-tuned four-wheel independent suspension. The FX35 uses a 3.5 L V6.

The FX series was updated for 2006 with new options and standard features. The FX35 now has leather seats, a power tilt/telescope steering wheel and a rear view camera with a color screen standard.

Engines
* 3.5 L VQ35DE V6
* 4.5 L VK45DE V8

Performance (FX45)
* 0-60 mph: 6.3 seconds
* 0-100 mph: 17.6 seconds
* 1/4 mile: 14.8 seconds at 95.1 mph
* 300 ft Skidpad: .89g
* Top Speed: 137 mph

Performance (FX35)
* 0-60 mph: 7.1 seconds
* 0-100 mph: NA
* 1/4 mile: 15.5 seconds at 91.0 mph
* 300 ft Skidpad: .89g
* Top Speed: 137 mph

Morgan Roadster 3.0 V6, 2004

2010-10-20T21:12:00.000-07:00

Morgan Roadster 3.0 V6, 2004

The Morgan Roadster is a car produced by the Morgan Motor Company. It was introduced in 2004.

Dimensions

* Length : 4010 mm
* Width : 1610 mm (standard wheels) / 1720 (optional wheels)
* Height : 1220 mm

Fuel
* Fuel Tank Volume : 55 litres (12 imperial gallons)
* Fuel Consumption :
o Urban: 20.3 mpg imperial (13.91 l/100 k
o Extra Urban: 38.17 mpg imperial (7.40 l/100 km)
o Combined: 28.9 mpg imperial (9.77 l/100 km)
* CO2: 231.8

Engine

* Configuration: 3.0 litre V6 24 valve
* Bore x stroke, mm: 89 x 79.5
* Engine capacity, cm³: 2967
* Max output EEC: 166 kW (226 hp) at 6150 rpm
* Max torque EEC: 206 N·m 280 (lbf·ft) at 4900 rpm
* Power-to-weight ratio: 240 hp/t, kW/t
* Torque to weight ratio: 199 lbf·ft/short ton, 297 N·m/t

Performance

* 0 - 100 km/h (62 mph) 4.9 s
* Top speed 134 mph (215 km/h)

Cadillac Eldorado, 1954

2010-10-10T20:10:00.000-07:00

Cadillac Eldorado, 1954

Cadillac El Camino Concept, 1954

2010-10-10T20:07:00.000-07:00

Cadillac El Camino Concept, 1954

Buick Roadmaster, 1949

2010-10-10T20:02:00.000-07:00

Buick Roadmaster, 1949

The origins of the Roadmaster name date to 1936 when Buick renamed its entire model line-up to celebrate the engineering improvements and design advancements over their 1935 models. Buick's Series 40 model range became the Special, the Buick Century took the place of the Series 60 and the Series 90 — Buick's largest and most luxurious vehicles — became the Limited. Buick's Series 80 became the Roadmaster.

Roadmasters produced between 1936 and 1958 were built on Buick's longest wheelbase and shared its basic structure with senior Oldsmobiles. Between 1946 and 1957, the Roadmaster was Buick's premium and best appointed model, and was offered in sedan, coupe, convertible and station wagon bodystyles between 1936 and 1948. In 1949 a hardtop coupe, designated "Riviera" joined the model line up; a four-door hardtop joined the model range in 1956.

The 1953 Buick Roadmaster station wagon, Model 79-R, was the last wood-bodied station wagon mass-produced in the United States. Its body was a product of Iona Manufacturing which built all Buick station wagon bodies between 1946 and 1964. Priced at US$4,031, the wagon was second in price to the Buick Skylark. Only 670 of these final woody wagons were produced for 1953.

In 1959 Buick again introduced a model range that represented a significant shift in its body design, and the Roadmaster name was replaced by the Electra name.

Buick Super-Series 50, 1948

2010-10-10T19:56:00.000-07:00

Buick Super-Series 50, 1948

1948 Buick Sedan. 4 door Buick sedan, standard shift.

Audi Sport quattro, 1984

2010-10-10T19:45:00.000-07:00

Audi Sport quattro, 1984

The Audi Sport Quattro was a Quattro programme car developed for homologation for Group B rallying in 1984, and sold as a production car in limited numbers. It featured an all aluminium alloy 2,133 cc (130.2 cu in) (2.1 L) 20v DOHC engine slightly smaller than that of the Audi Quattro (in order to qualify for the 3-litre engine class after the scale factor applied to turbo engines). In road-going form the engine was capable of producing 225 kW (306 PS/302 bhp), with the competition cars initially producing around 331 kW (450 PS/444 bhp).

The vehicle featured a body shell composed of carbon-kevlar and boasting wider arches, wider wheels (nine inches as compared to the Ur-Quattro's optional eight inch (203 mm) wide wheel rim), the steeper windscreen rake of the Audi 80 (requested by the Audi Sport rally team drivers for improved visibility) and, most noticeably, a 320 mm (12.6 in) shorter wheelbase. This was carried out in order to improve handling potential in the face of newer, smaller competition, such as the Lancia 037 and the Peugeot 205 T16, which had been purpose-built from the start for Group B rules.

Ford Tudor, 1928

2010-09-12T18:29:00.000-07:00

Ford Tudor, 1928

Ford Turtle-Back Roadster, 1922

2010-09-12T18:25:00.000-07:00

Ford Turtle-Back Roadster, 1922